Integrated Circuits (ICs)

LT1211ACN8#PBF

Active

Analog Devices

14MHZ, 7V/ΜS, SINGLE SUPPLY DUAL AND QUAD PRECISION OP AMPS

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsDatasheet R164 Reliability Data +1

Integrated Circuits (ICs)

LT1211ACN8#PBF

Active

Analog Devices

14MHZ, 7V/ΜS, SINGLE SUPPLY DUAL AND QUAD PRECISION OP AMPS

Deep-Dive with AI

DocumentsDatasheet R164 Reliability Data +1

Specifications Series Pricing Description Documents

Technical Specifications

Parameters and characteristics for this part

Specification	LT1211ACN8#PBF

Amplifier Type	General Purpose
Current - Input Bias	45 nA
Current - Output / Channel	50 mA
Current - Supply	1.8 mA
Gain Bandwidth Product	14 MHz
Mounting Type	Through Hole
Number of Circuits	2
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Package / Case	0.3 in
Package / Case	8-DIP
Package / Case	7.62 mm
Slew Rate	7 V/µs
Supplier Device Package	8-PDIP
Voltage - Input Offset	125 µV
Voltage - Supply Span (Max) [Max]	36 V
Voltage - Supply Span (Min) [Min]	2.5 V

LT1211 Series

14MHz, 7V/µs, Single Supply Dual and Quad Precision Op Amps

Part	Voltage - Supply Span (Min) [Min]	Package / Case	Package / Case	Package / Case	Number of Circuits	Current - Output / Channel	Amplifier Type	Voltage - Input Offset	Operating Temperature [Max]	Operating Temperature [Min]	Mounting Type	Slew Rate	Voltage - Supply Span (Max) [Max]	Current - Input Bias	Current - Supply	Supplier Device Package	Gain Bandwidth Product	Package / Case [y]	Package / Case [x]
Analog Devices LT1211IN8#PBF	2.5 V	0.3 in	8-DIP	7.62 mm	2	50 mA	General Purpose	150 µV	85 °C	-40 °C	Through Hole	7 V/µs	36 V	50 nA	1.8 mA	8-PDIP	14 MHz
Analog Devices LT1211CS8#TRPBF	2.5 V		8-SOIC		2	50 mA	General Purpose	150 µV	70 °C	0 °C	Surface Mount	7 V/µs	36 V	50 nA	1.8 mA	8-SO	14 MHz	3.9 mm	0.154 in
Analog Devices LT1211CS8#PBF	2.5 V		8-SOIC		2	50 mA	General Purpose	150 µV	70 °C	0 °C	Surface Mount	7 V/µs	36 V	50 nA	1.8 mA	8-SO	14 MHz	3.9 mm	0.154 in
Analog Devices LT1211IS8	2.5 V		8-SOIC		2	50 mA	General Purpose	150 µV	85 °C	-40 °C	Surface Mount	7 V/µs	36 V	50 nA	1.8 mA	8-SO	14 MHz	3.9 mm	0.154 in
Analog Devices LT1211CN8#PBF	2.5 V	0.3 in	8-DIP	7.62 mm	2	50 mA	General Purpose	150 µV	85 °C	-40 °C	Through Hole	7 V/µs	36 V	50 nA	1.8 mA	8-PDIP	14 MHz
Analog Devices LT1211ACN8#PBF	2.5 V	0.3 in	8-DIP	7.62 mm	2	50 mA	General Purpose	125 µV	85 °C	-40 °C	Through Hole	7 V/µs	36 V	45 nA	1.8 mA	8-PDIP	14 MHz
Analog Devices LT1211IN8#PBF	2.5 V	0.3 in	8-DIP	7.62 mm	2	50 mA	General Purpose	150 µV	85 °C	-40 °C	Through Hole	7 V/µs	36 V	50 nA	1.8 mA	8-PDIP	14 MHz

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Tube	1	$ 11.40

Description

General part information

LT1211 Series

The LT1211 is a dual, single supply precision op amp with a 14MHz gain-bandwidth product and a 7V/µs slew rate. The LT1212 is a quad version of the same amplifier. The DC precision of the LT1211/LT1212 eliminates trims in most systems while providing high frequency performance not usually found in single supply amplifiers.The LT1211/LT1212 will operate on any supply greater than 2.5V and less than 36V total. These amplifiers are specified on single 3.3V, single 5V and ±15V supplies, and only require 1.3mA of quiescent supply current per amplifier. The inputs can be driven beyond the supplies without damage or phase reversal of the output. The minimum output drive is 20mA, ideal for driving low impedance loads.Note:For applications requiring higher slew rate, see the LT1213/LT1214 and LT1215/LT1216 data sheets.Applications2.5V Full-Scale 12-Bit Systems: VOS<0.45LSB10V Full-Scale 16-Bit Systems: VOS<1.8LSBActive FiltersPhoto Diode AmplifiersDAC Current-to-Voltage AmplifiersBattery-Powered Systems

Documents

Technical documentation and resources

Datasheet

R164 Reliability Data

Reliability Data

Package Drawing - 8-Lead PDIP (Narrow 0.3 Inch)

Package Drawing