KSZ8081MLXIA-TR
ActiveETHERNET CONTROLLER, PHY TRANSCEIVER, IEEE 802.3, 3.135 V, 3.465 V, LQFP, 48 PINS
Deep-Dive with AI
Search across all available documentation for this part.
KSZ8081MLXIA-TR
ActiveETHERNET CONTROLLER, PHY TRANSCEIVER, IEEE 802.3, 3.135 V, 3.465 V, LQFP, 48 PINS
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | KSZ8081MLXIA-TR |
|---|---|
| Data Rate | 100 Mbps |
| Duplex | Full |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 48-LQFP |
| Protocol | Ethernet |
| Supplier Device Package | 48-LQFP (7x7) |
| Type | Transceiver |
| Voltage - Supply | 3.3 V |
KSZ8081 Series
10/100 Base-T/TX Physical Layer Transceiver
| Part | Type | Embedded | Contents | Function | Supplied Contents | Utilized IC / Part | Supplier Device Package | Duplex | Mounting Type | Voltage - Supply | Protocol | Package / Case | Operating Temperature [Max] | Operating Temperature [Min] | Data Rate |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 Microchip Technology | Interface | Board(s) | Ethernet PHY | Board(s) | KSZ8081RND | ||||||||||
 Microchip Technology | Transceiver | 32-QFN (5x5) | Full | Surface Mount | 1.8 V 2.5 V 3.3 V | RMII | 32-VFQFN Exposed Pad | 85 °C | -40 °C | ||||||
 Microchip Technology | Transceiver | 24-QFN (4x4) | Full | Surface Mount | 1.8 V 2.5 V 3.3 V | RMII | 24-VFQFN Exposed Pad | 70 °C | 0 °C | ||||||
 Microchip Technology | Transceiver | 48-LQFP (7x7) | Full | Surface Mount | 3.3 V | Ethernet | 48-LQFP | 70 °C | 0 °C | 100 Mbps | |||||
 Microchip Technology | Transceiver | 32-QFN (5x5) | Full | Surface Mount | 1.8 V 2.5 V 3.3 V | RMII | 32-VFQFN Exposed Pad | 70 °C | 0 °C | ||||||
Microchip Technology | Transceiver | 48-LQFP (7x7) | Full | Surface Mount | 3.3 V | Ethernet | 48-LQFP | 85 °C | -40 °C | 100 Mbps | |||||
Microchip Technology | Interface | Board(s) | Ethernet PHY | Board(s) | KSZ8081MNX | ||||||||||
 Microchip Technology | Transceiver | 32-QFN (5x5) | Full | Surface Mount | 1.8 V 2.5 V 3.3 V | MII | 32-VFQFN Exposed Pad | 85 °C | -40 °C | ||||||
 Microchip Technology | Transceiver | 48-LQFP (7x7) | Full | Surface Mount | 3.3 V | Ethernet | 48-LQFP | 70 °C | 0 °C | 100 Mbps | |||||
 Microchip Technology | Transceiver | 32-QFN (5x5) | Full | Surface Mount | 1.8 V 2.5 V 3.3 V | MII | 32-VFQFN Exposed Pad | 70 °C | 0 °C |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 2.00 | |
| 25 | $ 1.66 | |||
| 100 | $ 1.61 | |||
| Digi-Reel® | 1 | $ 2.00 | ||
| 25 | $ 1.66 | |||
| 100 | $ 1.61 | |||
| Tape & Reel (TR) | 1000 | $ 1.61 | ||
| Microchip Direct | T/R | 1 | $ 2.00 | |
| 25 | $ 1.66 | |||
| 100 | $ 1.51 | |||
| 1000 | $ 1.40 | |||
| 5000 | $ 1.32 | |||
| Newark | Each (Supplied on Cut Tape) | 1 | $ 1.66 | |
| 10 | $ 1.62 | |||
Description
General part information
KSZ8081 Series
The KSZ8081 is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable. The KSZ8081 is a highly-integrated PHY solution. It reduces board cost and simplifies board layout by using on-chip termination resistors for the differential pairs and by integrating a low-noise regulator to supply the 1.2V core, and by offering 1.8/2.5/3.3V digital I/O interface support.
The KSZ8081RNx offers the Reduced Media Independent Interface (RMII) for direct connection to RMII-compliant MACs in Ethernet processors and switches. As the power-up default, the KSZ8081RNA uses a 25MHz crystal to generate all required clocks, including the 50MHz RMII reference clock output for the MAC. The KSZ8081RND is the version that takes in the 50MHz RMII reference clock as the power-up default.
The KSZ8081MLX and KSZ8081MNX offer the Media Independent Interface (MII) for direct connection with MII-compliant Ethernet MAC processors and switches. A 25MHz crystal is used to generate all required clocks.
Documents
Technical documentation and resources