Integrated Circuits (ICs)

TPS61030PWPR

Active

1.8VIN, 4-A SWITCH, 96% EFFICIENT BOOST CONVERTER W/20ΜA IQ IN TSSOP-16

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsDesign considerations for a resistive feedback divider in a DC/DC converter Performing Accurate PFM Mode Efficiency Measurements (Rev. A)+17

Integrated Circuits (ICs)

TPS61030PWPR

Active

Texas Instruments

1.8VIN, 4-A SWITCH, 96% EFFICIENT BOOST CONVERTER W/20ΜA IQ IN TSSOP-16

Deep-Dive with AI

DocumentsDesign considerations for a resistive feedback divider in a DC/DC converter Performing Accurate PFM Mode Efficiency Measurements (Rev. A)+17

Specifications Series Pricing Description Documents

Technical Specifications

Parameters and characteristics for this part

Specification	TPS61030PWPR

Current - Output	3.6 A
Frequency - Switching	600 kHz
Function	Step-Up
Mounting Type	Surface Mount
Number of Outputs	1
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Output Configuration	Positive
Output Type	Adjustable
Package / Case	16-PowerTSSOP
Package / Case	0.173 in, 4.4 mm Width
Supplier Device Package	16-HTSSOP
Synchronous Rectifier	True
Topology	Boost
Voltage - Input (Max) [Max]	5.5 V
Voltage - Input (Min) [Min]	1.8 V
Voltage - Output (Max) [Max]	5.5 V
Voltage - Output (Min/Fixed)	1.8 V

TPS61030 Series

1.8Vin, 4-A Switch, 96% Efficient Boost Converter w/20µA Iq in TSSOP-16

Part	Voltage - Input (Max) [Max]	Supplier Device Package	Topology	Output Configuration	Operating Temperature [Max]	Operating Temperature [Min]	Output Type	Voltage - Output (Min/Fixed)	Current - Output	Number of Outputs	Function	Frequency - Switching	Package / Case	Voltage - Input (Min) [Min]	Mounting Type	Voltage - Output (Max) [Max]	Package / Case
Texas Instruments TPS61030RSARG4	5.5 V	16-QFN (4x4)	Boost	Positive	85 °C	-40 °C	Adjustable	1.8 V	3.6 A	1	Step-Up	600 kHz	16-VQFN Exposed Pad	1.8 V	Surface Mount	5.5 V
Texas Instruments TPS61030PWP	5.5 V	16-HTSSOP	Boost	Positive	85 °C	-40 °C	Adjustable	1.8 V	3.6 A	1	Step-Up	600 kHz	16-PowerTSSOP	1.8 V	Surface Mount	5.5 V	0.173 in 4.4 mm Width
Texas Instruments TPS61030RSAR	5.5 V	16-QFN (4x4)	Boost	Positive	85 °C	-40 °C	Adjustable	1.8 V	3.6 A	1	Step-Up	600 kHz	16-VQFN Exposed Pad	1.8 V	Surface Mount	5.5 V
Texas Instruments TPS61030PWPG4	5.5 V	16-HTSSOP	Boost	Positive	85 °C	-40 °C	Adjustable	1.8 V	3.6 A	1	Step-Up	600 kHz	16-PowerTSSOP	1.8 V	Surface Mount	5.5 V	0.173 in 4.4 mm Width
Texas Instruments TPS61030PWPRG4	5.5 V	16-HTSSOP	Boost	Positive	85 °C	-40 °C	Adjustable	1.8 V	3.6 A	1	Step-Up	600 kHz	16-PowerTSSOP	1.8 V	Surface Mount	5.5 V	0.173 in 4.4 mm Width
Texas Instruments TPS61030PWPR	5.5 V	16-HTSSOP	Boost	Positive	85 °C	-40 °C	Adjustable	1.8 V	3.6 A	1	Step-Up	600 kHz	16-PowerTSSOP	1.8 V	Surface Mount	5.5 V	0.173 in 4.4 mm Width

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Cut Tape (CT)	1	$ 2.98
		10	$ 2.67
		25	$ 2.53
		100	$ 2.19
		250	$ 2.08
		500	$ 1.87
		1000	$ 1.57
	Digi-Reel®	1	$ 2.98
		10	$ 2.67
		25	$ 2.53
		100	$ 2.19
		250	$ 2.08
		500	$ 1.87
		1000	$ 1.57
	Tape & Reel (TR)	2000	$ 1.50
		6000	$ 1.44
Newark	Each (Supplied on Cut Tape)	1	$ 3.64
		10	$ 3.48
		25	$ 3.31
		50	$ 3.17
		100	$ 3.03
		250	$ 2.93
		500	$ 2.86
		1000	$ 2.82
Texas Instruments	LARGE T&R	1	$ 2.25
		100	$ 1.97
		250	$ 1.38
		1000	$ 1.11

Description

General part information

TPS61030 Series

The TPS6103x devices provide a power supply solution for products powered by either a one-cell Li-Ion or Li-polymer, or a two to three-cell alkaline, NiCd or NiMH battery. The converter generates a stable output voltage that is either adjusted by an external resistor divider or fixed internally on the chip. It provides high efficient power conversion and is capable of delivering output currents up to 1 A at 5 V at a supply voltage down to 1.8 V. The implemented boost converter is based on a fixed frequency, pulse-width- modulation (PWM) controller using a synchronous rectifier to obtain maximum efficiency. At low load currents the converter enters Power Save mode to maintain a high efficiency over a wide load current range. The Power Save mode can be disabled, forcing the converter to operate at a fixed switching frequency. It can also operate synchronized to an external clock signal that is applied to the SYNC pin. The maximum peak current in the boost switch is limited to a value of 4500 mA.

The converter can be disabled to minimize battery drain. During shutdown, the load is completely disconnected from the battery. A low-EMI mode is implemented to reduce ringing and, in effect, lower radiated electromagnetic energy when the converter enters the discontinuous conduction mode.