
SN74LVCH244ADBQR
ActiveBUFFER/LINE DRIVER 8-CH NON-INVERTING 3-ST CMOS 20-PIN SSOP T/R
Deep-Dive with AI
Search across all available documentation for this part.

SN74LVCH244ADBQR
ActiveBUFFER/LINE DRIVER 8-CH NON-INVERTING 3-ST CMOS 20-PIN SSOP T/R
Technical Specifications
Parameters and characteristics for this part
| Specification | SN74LVCH244ADBQR |
|---|---|
| Current - Output High, Low | 24 mA |
| Logic Type | Buffer, Non-Inverting |
| Mounting Type | Surface Mount |
| Number of Bits per Element | 4 |
| Number of Elements | 2 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Output Type | 3-State |
| Package / Case | 20-SSOP |
| Package / Case [custom] | 0.154 in |
| Package / Case [custom] | 3.9 mm |
| Supplier Device Package | 20-SSOP |
| Voltage - Supply [Max] | 3.6 V |
| Voltage - Supply [Min] | 1.65 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 0.49 | |
| 10 | $ 0.35 | |||
| 25 | $ 0.31 | |||
| 100 | $ 0.27 | |||
| 250 | $ 0.25 | |||
| 500 | $ 0.24 | |||
| 1000 | $ 0.23 | |||
| Digi-Reel® | 1 | $ 0.49 | ||
| 10 | $ 0.35 | |||
| 25 | $ 0.31 | |||
| 100 | $ 0.27 | |||
| 250 | $ 0.25 | |||
| 500 | $ 0.24 | |||
| 1000 | $ 0.23 | |||
| Tape & Reel (TR) | 2500 | $ 0.22 | ||
| 5000 | $ 0.21 | |||
| 7500 | $ 0.21 | |||
| 12500 | $ 0.20 | |||
| 17500 | $ 0.20 | |||
| 25000 | $ 0.20 | |||
| Texas Instruments | LARGE T&R | 1 | $ 0.43 | |
| 100 | $ 0.29 | |||
| 250 | $ 0.23 | |||
| 1000 | $ 0.15 | |||
Description
General part information
SN74LVCH244A Series
The SN54LVCH244A octal buffer/line driver is designed for 2.7-V to 3.6-V VCCoperation, and the SN74LVCH244A octal buffer/line driver is designed for 1.65-V to 3.6-V VCCoperation.
These devices are organized as two 4-bit line drivers with separate output-enable (OE) inputs. WhenOEis low, these devices pass data from the A inputs to the Y outputs. WhenOEis high, the outputs are in the high-impedance state.
Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.
Documents
Technical documentation and resources