NC7SZ18P6X
ActiveTINYLOGIC UHS 1-OF-2 NON-INVERTING DEMULTIPLEXER WITH 3-STATE DESELECTED OUTPUT
Deep-Dive with AI
Search across all available documentation for this part.
NC7SZ18P6X
ActiveTINYLOGIC UHS 1-OF-2 NON-INVERTING DEMULTIPLEXER WITH 3-STATE DESELECTED OUTPUT
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | NC7SZ18P6X |
|---|---|
| Circuit [custom] | 1:2 |
| Circuit [custom] | 1 |
| Current - Output High, Low [x] | 32 mA |
| Current - Output High, Low [y] | 32 mA |
| Independent Circuits | 1 |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Supplier Device Package | SC-88 (SC-70-6) |
| Type | Demultiplexer |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 1.65 V |
| Voltage Supply Source | Single Supply |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 0.31 | |
| 10 | $ 0.17 | |||
| 25 | $ 0.13 | |||
| 100 | $ 0.10 | |||
| 250 | $ 0.08 | |||
| 500 | $ 0.07 | |||
| 1000 | $ 0.06 | |||
| Digi-Reel® | 1 | $ 0.31 | ||
| 10 | $ 0.17 | |||
| 25 | $ 0.13 | |||
| 100 | $ 0.10 | |||
| 250 | $ 0.08 | |||
| 500 | $ 0.07 | |||
| 1000 | $ 0.06 | |||
| Tape & Reel (TR) | 3000 | $ 0.05 | ||
| 6000 | $ 0.05 | |||
| 9000 | $ 0.04 | |||
| 15000 | $ 0.04 | |||
| 21000 | $ 0.04 | |||
| 30000 | $ 0.04 | |||
| 75000 | $ 0.03 | |||
| 150000 | $ 0.03 | |||
| 300000 | $ 0.03 | |||
| Newark | Each (Supplied on Full Reel) | 6000 | $ 0.04 | |
| 12000 | $ 0.04 | |||
| 18000 | $ 0.04 | |||
| 30000 | $ 0.03 | |||
| ON Semiconductor | N/A | 1 | $ 0.03 | |
Description
General part information
NC7SZ18 Series
The NC7SZ18 is a 1-of-2 non-inverting demultiplexer. The device will buffer the data on the A pin and pass to either output Y0or Y1dependent on whether state of the select pin (S) is LOW or HIGH respectively. The deselected output will be placed into a high impedance state. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a broad VCCoperating range. The device is specified to operate over the 1.65V to 5.5V VCCoperating range. The inputs and outputs are high impedance when VCCis 0V. Inputs tolerate voltages up to 5.5V independent of VCCoperating range.
Documents
Technical documentation and resources
