NC7SZ18 Series

TinyLogic UHS 1-of-2 Non-Inverting Demultiplexer with 3-STATE Deselected Output

Catalog

TinyLogic UHS 1-of-2 Non-Inverting Demultiplexer with 3-STATE Deselected Output

Part	Package / Case	Type	Current - Output High, Low [y]	Current - Output High, Low [x]	Circuit [custom]	Circuit [custom]	Supplier Device Package	Mounting Type	Operating Temperature [Max]	Operating Temperature [Min]	Independent Circuits	Voltage Supply Source	Voltage - Supply [Max]	Voltage - Supply [Min]
ON Semiconductor NC7SZ18L6X	6-UFDFN	Demultiplexer	32 mA	32 mA	1:2	1	6-MicroPak	Surface Mount	85 °C	-40 °C	1	Single Supply	5.5 V	1.65 V
ON Semiconductor NC7SZ18L6X	6-UFDFN	Demultiplexer	32 mA	32 mA	1:2	1	6-MicroPak	Surface Mount	85 °C	-40 °C	1	Single Supply	5.5 V	1.65 V
ON Semiconductor NC7SZ18P6X	6-TSSOP SC-88 SOT-363	Demultiplexer	32 mA	32 mA	1:2	1	SC-88 (SC-70-6)	Surface Mount	85 °C	-40 °C	1	Single Supply	5.5 V	1.65 V
ON Semiconductor NC7SZ18P6X-L22347	6-TSSOP SC-88 SOT-363	Demultiplexer	32 mA	32 mA	1:2	1	SC-88 SC70-6 SOT-363	Surface Mount	85 °C	-40 °C	1	Single Supply	5.5 V	1.65 V

Catalog

TinyLogic UHS 1-of-2 Non-Inverting Demultiplexer with 3-STATE Deselected Output

Key Features

• Ultra-High Speed: tPD2.5ns Typical at 5VCC

• High Impedance Output when Deselected

• Broad VCCOperating Range: 1.65V to 5.50V

• Power Down High Impedance Inputs/Outputs

• Over-Voltage Tolerance Inputs Facilitate 5V to 3V Translation

• Proprietary Noise/EMI Reduction Circuitry

• Ultra-Small MicroPak™ Packages

Description

The NC7SZ18 is a 1-of-2 non-inverting demultiplexer. The device will buffer the data on the A pin and pass to either output Y0or Y1dependent on whether state of the select pin (S) is LOW or HIGH respectively. The deselected output will be placed into a high impedance state. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a broad VCCoperating range. The device is specified to operate over the 1.65V to 5.5V VCCoperating range. The inputs and outputs are high impedance when VCCis 0V. Inputs tolerate voltages up to 5.5V independent of VCCoperating range.