SN74ABT162244DLR
Active16-CH, 4.5-V TO 5.5-V BUFFERS WITH TTL-COMPATIBLE CMOS INPUTS AND 3-STATE OUTPUTS
Deep-Dive with AI
Search across all available documentation for this part.
SN74ABT162244DLR
Active16-CH, 4.5-V TO 5.5-V BUFFERS WITH TTL-COMPATIBLE CMOS INPUTS AND 3-STATE OUTPUTS
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | SN74ABT162244DLR |
|---|---|
| Current - Output High, Low [custom] | 12 mA |
| Current - Output High, Low [custom] | 12 mA |
| Logic Type | Buffer, Non-Inverting |
| Mounting Type | Surface Mount |
| Number of Bits per Element | 4 |
| Number of Elements | 4 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Output Type | 3-State |
| Package / Case | 48-BSSOP |
| Package / Case [y] | 0.295 in |
| Package / Case [y] | 7.5 mm |
| Supplier Device Package | 48-SSOP |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 4.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.64 | |
| 10 | $ 1.48 | |||
| 25 | $ 1.39 | |||
| 100 | $ 1.19 | |||
| 250 | $ 1.11 | |||
| 500 | $ 0.97 | |||
| Digi-Reel® | 1 | $ 1.64 | ||
| 10 | $ 1.48 | |||
| 25 | $ 1.39 | |||
| 100 | $ 1.19 | |||
| 250 | $ 1.11 | |||
| 500 | $ 0.97 | |||
| Tape & Reel (TR) | 1000 | $ 0.81 | ||
| 2000 | $ 0.75 | |||
| 5000 | $ 0.72 | |||
| 10000 | $ 0.70 | |||
| Texas Instruments | LARGE T&R | 1 | $ 1.23 | |
| 100 | $ 1.02 | |||
| 250 | $ 0.73 | |||
| 1000 | $ 0.55 | |||
Description
General part information
SN74ABT162244 Series
The ’ABT162244 devices are 16-bit buffers and line drivers designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. These devices can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. These devices provide noninverting outputs and symmetrical active-low output-enable (OE)\ inputs.
The outputs, which are designed to source or sink up to 12 mA, include equivalent 25-series resistors to reduce overshoot and undershoot.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Documents
Technical documentation and resources
