The ADT6501 /ADT6502/ADT6503/ADT6504are trip point temperature switches available in a 5-lead SOT-23 package. Each part contains an internal band gap temperature sensor for local temperature sensing. When the temperature crosses the trip point setting, the logic output is activated. The ADT6501/ ADT6503 logic output is active low and open-drain. The ADT6502/ADT6504 logic output is active high and push-pull. The temperature is digitized to a resolution of 0.125°C (11-bit). The factory trip point settings are 10°C apart starting from −45°C to +15°C for the cold threshold models and from +35°C to +115°C for the hot threshold models.These devices require no external components and typically consume 30 μA supply current. Hysteresis is pin-selectable at 2°C and 10°C. The temperature switch is specified to operate over the supply range of 2.7 V to 5.5 V.The ADT6501 and ADT6502 are used for monitoring temperatures from +35°C to +115°C only. Therefore, the logic output pin becomes active when the temperature goes higher than the selected trip point temperature.The ADT6503 and ADT6504 are used for monitoring temperatures from −45°C to +15°C only. Therefore, the logic output pin becomes active when the temperature goes lower than the selected trip point temperature.PRODUCT HIGHLIGHTSΣ-Δ based temperature measurement gives high accuracy and noise immunity.Wide operating temperature range from −55°C to +125°C.±0.5°C typical accuracy from −45°C to +115°C.Factory threshold settings from 35°C to 115°C in 10°C increments.Supply voltage is 2.7 V to 5.5 V.Supply current of 30 μA.Space-saving, 5-lead SOT-23 package.Pin-selectable temperature hysteresis of 2°C or 10°C.Temperature resolution of 0.125°C.APPLICATIONSMedical equipmentAutomotiveCell phonesHard disk drivesPersonal computersElectronic test equipmentDomestic appliancesProcess controls