MIC2506YM-TR
ActiveHIGH SIDE SWITCH 2SWITCH 3 TO 7.5V 2A 8-PIN SOIC T/R
MIC2506YM-TR
ActiveHIGH SIDE SWITCH 2SWITCH 3 TO 7.5V 2A 8-PIN SOIC T/R
Technical Specifications
Parameters and characteristics for this part
| Specification | MIC2506YM-TR |
|---|---|
| Current - Output (Max) [Max] | 1 A |
| Fault Protection | Over Temperature, Current Limiting (Fixed), Open Load Detect, UVLO |
| Features | Slew Rate Controlled, Status Flag |
| Input Type | Non-Inverting |
| Interface | On/Off |
| Mounting Type | Surface Mount |
| Number of Outputs | 2 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | High Side |
| Output Type | N-Channel |
| Package / Case | 8-SOIC |
| Package / Case [x] | 0.154 in |
| Package / Case [y] | 3.9 mm |
| Ratio - Input:Output [custom] | 1:2 |
| Rds On (Typ) | 75 mOhm |
| Supplier Device Package | 8-SOIC |
| Switch Type | General Purpose |
| Voltage - Load [Max] | 7.5 V |
| Voltage - Load [Min] | 2.7 V |
| Voltage - Supply (Vcc/Vdd) | False |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 4.90 | |
| 25 | $ 4.08 | |||
| 100 | $ 3.72 | |||
| Digi-Reel® | 1 | $ 4.90 | ||
| 25 | $ 4.08 | |||
| 100 | $ 3.72 | |||
| Tape & Reel (TR) | 2500 | $ 3.72 | ||
| Microchip Direct | T/R | 1 | $ 4.90 | |
| 25 | $ 4.08 | |||
| 100 | $ 3.72 | |||
| 1000 | $ 3.12 | |||
| 5000 | $ 2.86 | |||
| 10000 | $ 2.65 | |||
| Newark | Each (Supplied on Cut Tape) | 1 | $ 5.10 | |
| 10 | $ 4.67 | |||
| 25 | $ 4.24 | |||
| 50 | $ 4.06 | |||
Description
General part information
MIC2506 Series
The MIC2505, MIC2505-1, MIC2505-2, and MIC2506 are single and dual integrated high-side power switches that consist of TTL compatible control/enable inputs, a charge pump, and protected N-channel MOSFETs. The MIC2505/6 family can be used instead of separate high-side drivers and MOSFETs in many low-voltage applications.
The MIC2505/6 family controls voltages ranging from 2.7V to 7.5V. The MIC2505-series can deliver at least 2A continuous current while the MIC2506 can deliver at least 1A continuous current from each output. A slow turn-on feature prevents high inrush current when switching capacitive loads. The internal control circuitry is powered from the same 2.7V to 7.5V. Within the device’s input range, outputs can be forced higher than the input voltage when disabled.
Multipurpose open-drain fault flag outputs indicate overcurrent limiting, open-load detection (except MIC2505-1 and -2 versions), thermal shutdown, or undervoltage lockout for each channel.
