Specification	TRS3222CDBR

Data Rate	250 KBd
Duplex	Full
Mounting Type	Surface Mount
Number of Drivers/Receivers [custom]	2
Number of Drivers/Receivers [custom]	2
Operating Temperature [Max]	70 °C
Operating Temperature [Min]	0 °C
Package / Case	20-SSOP
Package / Case [x]	0.209 in
Package / Case [y]	5.3 mm
Protocol	RS232
Receiver Hysteresis	300 mV
Supplier Device Package	20-SSOP
Type	Transceiver
Voltage - Supply [Max]	5.5 V
Voltage - Supply [Min]	3 V

TRS3222 Series

3- to 5.5-V dual channel 250kbps RS-232 line driver/receiver with +/-15-kV ESD protection

Part	Receiver Hysteresis	Mounting Type	Duplex	Supplier Device Package	Voltage - Supply [Max]	Voltage - Supply [Min]	Data Rate	Package / Case	Type	Operating Temperature [Max]	Operating Temperature [Min]	Protocol	Number of Drivers/Receivers [custom]	Number of Drivers/Receivers [custom]	Package / Case [y]	Package / Case [x]
Texas Instruments TRS3222ECDW	300 mV	Surface Mount	Full	20-SOIC	5.5 V	3 V	500 kbps	20-SOIC (0.295" 7.50mm Width)	Transceiver	70 °C	0 °C	RS232	2	2
Texas Instruments TRS3222EIPW	300 mV	Surface Mount	Full	20-TSSOP	5.5 V	3 V	500 kbps	20-TSSOP	Transceiver	85 °C	-40 C	RS232	2	2	4.4 mm	0.173 "
Texas Instruments TRS3222ECPWRG4	300 mV	Surface Mount	Full	20-TSSOP	5.5 V	3 V	500 kbps	20-TSSOP	Transceiver	70 °C	0 °C	RS232	2	2	4.4 mm	0.173 "
Texas Instruments TRS3222ECPWR	300 mV	Surface Mount	Full	20-TSSOP	5.5 V	3 V	500 kbps	20-TSSOP	Transceiver	70 °C	0 °C	RS232	2	2	4.4 mm	0.173 "
Texas Instruments TRS3222ECDBR	300 mV	Surface Mount	Full	20-SSOP	5.5 V	3 V	500 kbps	20-SSOP	Transceiver	70 °C	0 °C	RS232	2	2	5.3 mm	0.209 in
Texas Instruments TRS3222EIPWR	300 mV	Surface Mount	Full	20-TSSOP	5.5 V	3 V	500 kbps	20-TSSOP	Transceiver	85 °C	-40 C	RS232	2	2	4.4 mm	0.173 "
Texas Instruments TRS3222EIDB	300 mV	Surface Mount	Full	20-SSOP	5.5 V	3 V	500 kbps	20-SSOP	Transceiver	85 °C	-40 C	RS232	2	2	5.3 mm	0.209 in
Texas Instruments TRS3222ECPWG4	300 mV	Surface Mount	Full	20-TSSOP	5.5 V	3 V	500 kbps	20-TSSOP	Transceiver	70 °C	0 °C	RS232	2	2	4.4 mm	0.173 "
Texas Instruments TRS3222EIDBR	300 mV	Surface Mount	Full	20-SSOP	5.5 V	3 V	500 kbps	20-SSOP	Transceiver	85 °C	-40 C	RS232	2	2	5.3 mm	0.209 in
Texas Instruments TRS3222CDBR	300 mV	Surface Mount	Full	20-SSOP	5.5 V	3 V	250 KBd	20-SSOP	Transceiver	70 °C	0 °C	RS232	2	2	5.3 mm	0.209 in

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	N/A	0	$ 0.00
Texas Instruments	LARGE T&R	1	$ 1.63
		100	$ 1.35
		250	$ 0.97
		1000	$ 0.73

Description

General part information

TRS3222 Series

The TRS3222 consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The device operates at data signaling rates up to 250 kbit/s and a maximum of 30-V/µ s driver output slew rate.

The TRS3222 can be placed in the power-down mode by settingPWRDOWNlow, which draws only 1 µ A from the power supply. When the device is powered down, the receivers remain active while the drivers are placed in the high-impedance state. Also, during power down, the onboard charge pump is disabled; V+ is lowered to VCC, and V- is raised toward GND. Receiver outputs also can be placed in the high-impedance state by settingENhigh.

Documents

Technical documentation and resources

3-V to 5.5-V Multichannel RS-232 Line Driver/Receiver With +/-15-kV ESD Protecti datasheet

Data sheet