Integrated Circuits (ICs)

TRS3222ECPWR

Obsolete

Texas Instruments

IC TRANSCEIVER FULL 2/2 20TSSOP

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsDatasheet

Integrated Circuits (ICs)

TRS3222ECPWR

Obsolete

Texas Instruments

IC TRANSCEIVER FULL 2/2 20TSSOP

Deep-Dive with AI

DocumentsDatasheet

Specifications Series Pricing Description Documents

Technical Specifications

Parameters and characteristics for this part

Specification	TRS3222ECPWR

Data Rate	500 kbps
Duplex	Full
Mounting Type	Surface Mount
Number of Drivers/Receivers [custom]	2
Number of Drivers/Receivers [custom]	2
Operating Temperature [Max]	70 °C
Operating Temperature [Min]	0 °C
Package / Case	20-TSSOP
Package / Case [x]	0.173 in
Package / Case [y]	4.4 mm
Protocol	RS232
Receiver Hysteresis	300 mV
Supplier Device Package	20-TSSOP
Type	Transceiver
Voltage - Supply [Max]	5.5 V
Voltage - Supply [Min]	3 V

TRS3222E Series

3- to 5.5-V dual channel 500kbps RS-232 line driver/receiver with +/-15-kV IEC-ESD protection

Part	Receiver Hysteresis	Type	Protocol	Operating Temperature [Max]	Operating Temperature [Min]	Mounting Type	Data Rate	Number of Drivers/Receivers [custom]	Number of Drivers/Receivers [custom]	Package / Case	Package / Case [y]	Package / Case [y]	Supplier Device Package	Voltage - Supply [Max]	Voltage - Supply [Min]	Duplex	Package / Case [x]
Texas Instruments TRS3222ECDW	300 mV	Transceiver	RS232	70 °C	0 °C	Surface Mount	500 kbps	2	2	20-SOIC	0.295 in	7.5 mm	20-SOIC	5.5 V	3 V	Full
Texas Instruments TRS3222ECPWRG4	300 mV	Transceiver	RS232	70 °C	0 °C	Surface Mount	500 kbps	2	2	20-TSSOP	4.4 mm		20-TSSOP	5.5 V	3 V	Full	0.173 in
Texas Instruments TRS3222ECPWR	300 mV	Transceiver	RS232	70 °C	0 °C	Surface Mount	500 kbps	2	2	20-TSSOP	4.4 mm		20-TSSOP	5.5 V	3 V	Full	0.173 in
Texas Instruments TRS3222ECDBR	300 mV	Transceiver	RS232	70 °C	0 °C	Surface Mount	500 kbps	2	2	20-SSOP			20-SSOP	5.5 V	3 V	Full
Texas Instruments TRS3222EIPWR	300 mV	Transceiver	RS232	85 °C	-40 °C	Surface Mount	500 kbps	2	2	20-TSSOP	4.4 mm		20-TSSOP	5.5 V	3 V	Full	0.173 in
Texas Instruments TRS3222EIDB	300 mV	Transceiver	RS232	85 °C	-40 °C	Surface Mount	500 kbps	2	2	20-SSOP			20-SSOP	5.5 V	3 V	Full
Texas Instruments TRS3222ECPWG4	300 mV	Transceiver	RS232	70 °C	0 °C	Surface Mount	500 kbps	2	2	20-TSSOP	4.4 mm		20-TSSOP	5.5 V	3 V	Full	0.173 in
Texas Instruments TRS3222EIDBR	300 mV	Transceiver	RS232	85 °C	-40 °C	Surface Mount	500 kbps	2	2	20-SSOP			20-SSOP	5.5 V	3 V	Full
Texas Instruments TRS3222CDBR	300 mV	Transceiver	RS232	70 °C	0 °C	Surface Mount	250 KBd	2	2	20-SSOP			20-SSOP	5.5 V	3 V	Full

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Description

General part information

TRS3222E Series

The TRS3222E consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND).

The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The device operates at typical data signaling rates up to 500 kbit/s and a maximum of 30-V/µs driver output slew rate.

The TRS3222E can be placed in the power-down mode by setting the power-down (PWRDOWN) input low, which draws only 1 µA from the power supply. When the device is powered down, the receivers remain active while the drivers are placed in the high-impedance state. Also, during power down, the onboard charge pump is disabled; V+ is lowered to VCC, and V– is raised toward GND. Receiver outputs also can be placed in the high-impedance state by setting enable (EN) high.

Documents

Technical documentation and resources