MCP65R46T-1202E/CHY
ActiveANALOG COMPARATOR, LOW POWER, 1 CHANNELS, 4 ΜS, 1.8V TO 5.5V, SOT-23, 6 PINS
Deep-Dive with AI
Search across all available documentation for this part.
MCP65R46T-1202E/CHY
ActiveANALOG COMPARATOR, LOW POWER, 1 CHANNELS, 4 ΜS, 1.8V TO 5.5V, SOT-23, 6 PINS
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | MCP65R46T-1202E/CHY |
|---|---|
| CMRR, PSRR (Typ) | 70 dB, 80 dB |
| Current - Input Bias (Max) [Max] | 1 pA |
| Current - Output (Typ) | 50 mA |
| Current - Quiescent (Max) [Max] | 4 µA |
| Hysteresis | 5 mV |
| Mounting Type | Surface Mount |
| Number of Elements | 1 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Output Type | TTL, Open-Drain, CMOS |
| Package / Case | SOT-23-6 |
| Propagation Delay (Max) [Max] | 8 µs |
| Supplier Device Package | SOT-23-6 |
| Type | General Purpose |
| Voltage - Input Offset (Max) [Max] | 10 mV |
| Voltage - Supply, Single/Dual (±) [Max] | 5.5 V |
| Voltage - Supply, Single/Dual (±) [Min] | 1.8 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 0.53 | |
| 25 | $ 0.45 | |||
| 100 | $ 0.41 | |||
| Digi-Reel® | 1 | $ 0.53 | ||
| 25 | $ 0.45 | |||
| 100 | $ 0.41 | |||
| Tape & Reel (TR) | 3000 | $ 0.41 | ||
| Microchip Direct | T/R | 1 | $ 0.53 | |
| 25 | $ 0.45 | |||
| 100 | $ 0.41 | |||
| 1000 | $ 0.40 | |||
| 5000 | $ 0.39 | |||
Description
General part information
MCP65R46 Series
The MCP65R46 single, open drain output comparator is optimized for low-power, single-supply applications with greater than rail-to-rail input operation. The output limits supply current surges and dynamic power consumption while switching. The internal input hysteresis eliminates output switching due to internal noise voltage, reducing current draw. The MCP65R46 can be used as a level-shifter from 1.6V to 10V using a pull-up resistor. It can also be used as a wired-OR logic. An internal voltage reference is also provided, at 1.21V or 2.4V. AEC-Q100 Grade 1 qualification is available for this device
Documents
Technical documentation and resources
