SN74ABT841APWR
Active10-BIT BUS-INTERFACE D-TYPE LATCHES WITH 3-STATE OUTPUTS
Deep-Dive with AI
Search across all available documentation for this part.
SN74ABT841APWR
Active10-BIT BUS-INTERFACE D-TYPE LATCHES WITH 3-STATE OUTPUTS
Technical Specifications
Parameters and characteristics for this part
| Specification | SN74ABT841APWR |
|---|---|
| Circuit | 10:10 |
| Current - Output High, Low [custom] | 64 mA |
| Current - Output High, Low [custom] | 32 mA |
| Delay Time - Propagation | 4.1 ns |
| Independent Circuits | 1 |
| Logic Type | D-Type Transparent Latch |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Output Type | Tri-State |
| Package / Case | 24-TSSOP |
| Package / Case | 0.173 in, 4.4 mm |
| Supplier Device Package | 24-TSSOP |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 4.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.79 | |
| 10 | $ 1.61 | |||
| 25 | $ 1.52 | |||
| 100 | $ 1.29 | |||
| 250 | $ 1.21 | |||
| 500 | $ 1.06 | |||
| 1000 | $ 0.88 | |||
| Digi-Reel® | 1 | $ 1.79 | ||
| 10 | $ 1.61 | |||
| 25 | $ 1.52 | |||
| 100 | $ 1.29 | |||
| 250 | $ 1.21 | |||
| 500 | $ 1.06 | |||
| 1000 | $ 0.88 | |||
| Tape & Reel (TR) | 2000 | $ 0.82 | ||
| 6000 | $ 0.79 | |||
| 10000 | $ 0.76 | |||
| Texas Instruments | LARGE T&R | 1 | $ 1.35 | |
| 100 | $ 1.11 | |||
| 250 | $ 0.80 | |||
| 1000 | $ 0.60 | |||
Description
General part information
SN74ABT841A Series
The SN54ABT841 and SN74ABT841A 10-bit latches are designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.
The ten transparent D-type latches provide true data at their outputs.
A buffered output-enable (OE\) input can be used to place the ten outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without need for interface or pullup components.
Documents
Technical documentation and resources
