LM5064PMHE/NOPB
Active-10-V TO -80-V HOT SWAP CONTROLLER WITH PMBUS
Deep-Dive with AI
Search across all available documentation for this part.
LM5064PMHE/NOPB
Active-10-V TO -80-V HOT SWAP CONTROLLER WITH PMBUS
Technical Specifications
Parameters and characteristics for this part
| Specification | LM5064PMHE/NOPB |
|---|---|
| Applications | -48 V |
| Current - Supply | 6 mA |
| Features | PMBus |
| Internal Switch(s) | False |
| Mounting Type | Surface Mount |
| Number of Channels | 1 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 28-PowerTSSOP |
| Package / Case [custom] | 4.4 mm |
| Package / Case [custom] | 0.173 " |
| Programmable Features | Latched Fault, Circuit Breaker, UVLO, OVP, Current Limit, Thermal Limit, Fault Timeout, Auto Retry |
| Supplier Device Package | 28-HTSSOP |
| Type | Hot Swap Controller, Monitor |
| Voltage - Supply [Max] | -10 V |
| Voltage - Supply [Min] | -80 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 6.60 | |
| 10 | $ 5.96 | |||
| 25 | $ 5.69 | |||
| 100 | $ 4.94 | |||
| Digi-Reel® | 1 | $ 6.60 | ||
| 10 | $ 5.96 | |||
| 25 | $ 5.69 | |||
| 100 | $ 4.94 | |||
| Tape & Reel (TR) | 250 | $ 4.72 | ||
| 500 | $ 4.30 | |||
| 1250 | $ 3.75 | |||
| 2500 | $ 3.61 | |||
| Texas Instruments | SMALL T&R | 1 | $ 5.05 | |
| 100 | $ 4.12 | |||
| 250 | $ 3.24 | |||
| 1000 | $ 2.75 | |||
Description
General part information
LM5064 Series
The LM5064 combines a high performance hot swap controller with a PMBusTMcompliant SMBus/I2C interface to accurately measure, protect and control the electrical operating conditions of systems connected to a backplane power bus. The LM5064 continuously supplies real-time power, voltage, current, temperature and fault data to the system management host via the SMBus interface.
The LM5064 control block includes a unique hot swap architecture that provides current and power limiting to protect sensitive circuitry during insertion of boards into a live system backplane, or any other "hot" power source. A fast acting circuit breaker prevents damage in the event of a short circuit on the output. The input under-voltage and over-voltage levels and hysteresis are configurable, as well as the insertion delay time and fault detection time. A temperature monitoring block on the LM5064 interfaces with a low-cost external diode for monitoring the temperature of the external MOSFET or other thermally sensitive components. The PGD output provides a fast indicator when the input and/or output voltages are outside their programmed ranges.
The LM5064 monitoring circuit computes both the real-time and average values of subsystem operating parameters (VIN, IIN, PIN, VOUT) as well as the peak power. Accurate power averaging is accomplished by averaging the product of the input voltage and current. A black box (Telemetry/Fault Snapshot) function captures and stores telemetry data and device status in the event of a warning or a fault.
Documents
Technical documentation and resources
