TUSB1210BRHBRQ1
ActiveUSB TRANSCEIVER 1TR 480MBPS 32-PIN VQFN EP T/R AUTOMOTIVE AEC-Q100
Deep-Dive with AI
Search across all available documentation for this part.
TUSB1210BRHBRQ1
ActiveUSB TRANSCEIVER 1TR 480MBPS 32-PIN VQFN EP T/R AUTOMOTIVE AEC-Q100
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | TUSB1210BRHBRQ1 |
|---|---|
| Data Rate | 480 Mbps |
| Duplex | Half |
| Grade | Automotive |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 C |
| Package / Case | 32-VFQFN Exposed Pad |
| Protocol | USB 2.0 |
| Qualification | AEC-Q100 |
| Receiver Hysteresis | 50 mV |
| Supplier Device Package | 32-VQFN (5x5) |
| Type | Transceiver |
| Voltage - Supply [Max] | 4.8 V |
| Voltage - Supply [Min] | 2.7 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 4.05 | |
| 10 | $ 3.64 | |||
| 25 | $ 3.44 | |||
| 100 | $ 2.98 | |||
| 250 | $ 2.83 | |||
| 500 | $ 2.54 | |||
| 1000 | $ 2.14 | |||
| Digi-ReelÛ | 1 | $ 4.05 | ||
| 10 | $ 3.64 | |||
| 25 | $ 3.44 | |||
| 100 | $ 2.98 | |||
| 250 | $ 2.83 | |||
| 500 | $ 2.54 | |||
| 1000 | $ 2.14 | |||
| N/A | 1446 | $ 4.32 | ||
| Tape & Reel (TR) | 3000 | $ 1.89 | ||
| Texas Instruments | LARGE T&R | 1 | $ 3.06 | |
| 100 | $ 2.68 | |||
| 250 | $ 1.88 | |||
| 1000 | $ 1.51 | |||
Description
General part information
TUSB1210 Series
The TUSB1210 is a USB2.0 transceiver chip, designed to interface with a USB controller through a ULPI interface. The device supports all USB2.0 data rates (high-speed 480 Mbps, full-speed 12 Mbps, and low-speed 1.5 Mbps), and is compliant to both host and peripheral modes. The device additionally supports a UART mode and legacy ULPI serial modes. TUSB1210 also supports the OTG (Ver1.3) optional addendum to the USB 2.0 Specification, including HNP and SRP.
The DP/DM external component compensation in the transmitter compensates for variations in the series impendence in order to match with the data line impedance and the receiver input impedance, to limit data reflections and thereby improve eye diagrams.
The TUSB1210 is a USB2.0 transceiver chip, designed to interface with a USB controller through a ULPI interface. The device supports all USB2.0 data rates (high-speed 480 Mbps, full-speed 12 Mbps, and low-speed 1.5 Mbps), and is compliant to both host and peripheral modes. The device additionally supports a UART mode and legacy ULPI serial modes. TUSB1210 also supports the OTG (Ver1.3) optional addendum to the USB 2.0 Specification, including HNP and SRP.
Documents
Technical documentation and resources
