MCP6275-E/P
ActiveIC,OPERATIONAL AMPLIFIER,DUAL,CMOS,DIP,8PIN,PLASTIC ROHS COMPLIANT: YES
Deep-Dive with AI
Search across all available documentation for this part.
MCP6275-E/P
ActiveIC,OPERATIONAL AMPLIFIER,DUAL,CMOS,DIP,8PIN,PLASTIC ROHS COMPLIANT: YES
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | MCP6275-E/P |
|---|---|
| Amplifier Type | General Purpose |
| Current - Input Bias | 1 pA |
| Current - Output / Channel | 25 mA |
| Current - Supply | 170 µA |
| Gain Bandwidth Product | 2 MHz |
| Mounting Type | Through Hole |
| Number of Circuits | 2 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Output Type | Rail-to-Rail |
| Package / Case | 0.3 in |
| Package / Case | 8-DIP |
| Package / Case | 7.62 mm |
| Slew Rate | 0.9 V/µs |
| Supplier Device Package | 8-PDIP |
| Voltage - Input Offset | 3 mV |
| Voltage - Supply Span (Max) [Max] | 6 V |
| Voltage - Supply Span (Min) [Min] | 2 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tube | 480 | $ 0.73 | |
| Microchip Direct | TUBE | 1 | $ 0.97 | |
| 25 | $ 0.80 | |||
| 100 | $ 0.73 | |||
| Newark | Each | 100 | $ 0.77 | |
Description
General part information
MCP6275 Series
The Microchip Technology Inc. MCP6271/1R/2/3/4/5 family of operational amplifiers (op amps) provide wide bandwidth for the current. This family has a 2 MHz Gain Bandwidth Product (GBWP) and a 65° Phase Margin. This family also operates from a single supply voltage as low as 2.0V, while drawing 170 µA (typical) quiescent current. The MCP6271/1R/2/3/4/5 supports rail-to-rail input and output swing, with a common mode input voltage range of VDD + 300mV to VSS – 300mV. This family of op amps is designed with Microchip’s advanced CMOS process. The MCP6275 has a Chip Select input (CS) for dual op amps in an 8-pin package and is manufactured by cascading two op amps (the output of op amp A connected to the non-inverting input of op amp B). The CS input puts the device in low power mode.
Documents
Technical documentation and resources
