MCP14A0152T-E/MAY
ActiveMOSFET DRIVER, LOW SIDE, 4.5V-18V SUPPLY, 1.5A OUTPUT, DFN-6
Deep-Dive with AI
Search across all available documentation for this part.
MCP14A0152T-E/MAY
ActiveMOSFET DRIVER, LOW SIDE, 4.5V-18V SUPPLY, 1.5A OUTPUT, DFN-6
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | MCP14A0152T-E/MAY |
|---|---|
| Channel Type | Single |
| Current - Peak Output (Source, Sink) | 1.5 A, 1.5 A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel, P-Channel MOSFET |
| Input Type | Non-Inverting |
| Logic Voltage - VIL, VIH | 0.8 V, 2 V |
| Mounting Type | Surface Mount |
| Number of Drivers | 1 |
| Operating Temperature [Max] | 150 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 6-VDFN Exposed Pad |
| Rise / Fall Time (Typ) [custom] | 11.5 ns |
| Rise / Fall Time (Typ) [custom] | 10 ns |
| Supplier Device Package | 6-DFN (2x2) |
| Voltage - Supply [Max] | 18 V |
| Voltage - Supply [Min] | 4.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 0.99 | |
| Digi-Reel® | 1 | $ 0.99 | ||
| Tape & Reel (TR) | 3000 | $ 0.75 | ||
| Microchip Direct | T/R | 1 | $ 0.99 | |
| 25 | $ 0.81 | |||
| 100 | $ 0.75 | |||
| 1000 | $ 0.72 | |||
| Newark | Each (Supplied on Full Reel) | 100 | $ 0.80 | |
Description
General part information
MCP14A0152 Series
The MCP14A0151/2 devices are high-speed MOSFET gate drivers that are capable of providing up to 1.5 A of peak current while operating from a single 4.5 V to 18 V supply. The inverting (MCP14A0151) or non-inverting (MCP14A0152) single channel output is directly controlled from either TTL or CMOS (2 V to 18 V) logic. Feature low shoot-through current, matched rise and fall times, and short propagation delays which make them ideal for high switching frequency applications.
The MCP14A0151/2 family of MOSFET gate drivers offer enhanced control with Enable functionality. The active-high Enable pin can be driven low to drive the output of the MCP14A0151/2 low, regardless of the status of the Input pin. An integrated pull-up resistor allows the user to leave the Enable pin floating for standard operation.
Additionally, the MCP14A0151/2 MOSFET gate drivers feature separate ground pins (AGND and GND), allowing greater noise isolation between the level-sensitive Input/Enable pins and the fast, high-current transitions of the push-pull output stage.
Documents
Technical documentation and resources
