TPS22932BYFPT
Active3.6-V, 0.5-A, 55-MΩ, 80NA LEAKAGE LOAD SWITCH WITH OUTPUT DISCHARGE
Deep-Dive with AI
Search across all available documentation for this part.
TPS22932BYFPT
Active3.6-V, 0.5-A, 55-MΩ, 80NA LEAKAGE LOAD SWITCH WITH OUTPUT DISCHARGE
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | TPS22932BYFPT |
|---|---|
| Current - Output (Max) [Max] | 500 mA |
| Features | Slew Rate Controlled, Load Discharge |
| Input Type | Non-Inverting |
| Interface | On/Off |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | High Side |
| Output Type | P-Channel |
| Package / Case | 6-XFBGA, DSBGA |
| Ratio - Input:Output [custom] | 1:1 |
| Rds On (Typ) | 55 mOhm |
| Supplier Device Package | 6-DSBGA |
| Switch Type | General Purpose |
| Voltage - Load [Max] | 3.6 V |
| Voltage - Load [Min] | 1.1 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 0.88 | |
| 10 | $ 0.79 | |||
| 25 | $ 0.75 | |||
| 100 | $ 0.61 | |||
| Digi-Reel® | 1 | $ 0.88 | ||
| 10 | $ 0.79 | |||
| 25 | $ 0.75 | |||
| 100 | $ 0.61 | |||
| Tape & Reel (TR) | 250 | $ 0.40 | ||
| 500 | $ 0.36 | |||
| 1250 | $ 0.33 | |||
| Texas Instruments | SMALL T&R | 1 | $ 0.65 | |
| 100 | $ 0.50 | |||
| 250 | $ 0.37 | |||
| 1000 | $ 0.26 | |||
Description
General part information
TPS22932B Series
The TPS22932B device is a low rONload switch with controlled turnon. The device contains a P-channel MOSFET that can operate over an input voltage range of 1.1 V to 3.6 V.
The switch is controlled by eight patterns of 3-bit input. The user can choose the logic functions MUX, AND, OR, NAND, NOR, inverter, and noninverter. All inputs can be connected to VINor GND. The control pins can be connected to low-voltage GPIOs allowing the switch to be controlled by either 1.2-V, 1.8-V, 2.5-V, or 3.3-V logic signals while keeping extremely low quiescent current.
A 120-Ω on-chip load resistor is available for output quick discharge when the switch is turned off. The rise time (slew rate) of the device is internally controlled to avoid inrush current: the rise time of TPS22932B is 165 µs.
Documents
Technical documentation and resources
