MIC94060YMT-TR
ActiveLOADSWITCH W/LEVEL-SHIFT 4 UDFN 1.2X1.6X0.6MM T/R ROHS COMPLIANT: YES
Deep-Dive with AI
Search across all available documentation for this part.
MIC94060YMT-TR
ActiveLOADSWITCH W/LEVEL-SHIFT 4 UDFN 1.2X1.6X0.6MM T/R ROHS COMPLIANT: YES
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | MIC94060YMT-TR |
|---|---|
| Current - Output (Max) [Max] | 2 A |
| Input Type | Non-Inverting |
| Interface | On/Off |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | High Side |
| Output Type | P-Channel |
| Package / Case | 4-TMLFÛ, 4-UFDFN Exposed Pad |
| Ratio - Input:Output [custom] | 1:1 |
| Rds On (Typ) | 85 mOhm |
| Supplier Device Package | 4-TMLFÛ |
| Supplier Device Package [x] | 1.2 |
| Supplier Device Package [y] | 1.6 |
| Switch Type | General Purpose |
| Voltage - Load [Max] | 5.5 V |
| Voltage - Load [Min] | 1.7 V |
| Voltage - Supply (Vcc/Vdd) | False |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 0.69 | |
| 25 | $ 0.58 | |||
| 100 | $ 0.53 | |||
| Digi-ReelÛ | 1 | $ 0.69 | ||
| 25 | $ 0.58 | |||
| 100 | $ 0.53 | |||
| Tape & Reel (TR) | 5000 | $ 0.53 | ||
| Microchip Direct | T/R | 1 | $ 0.69 | |
| 25 | $ 0.58 | |||
| 100 | $ 0.53 | |||
| 1000 | $ 0.52 | |||
| 5000 | $ 0.50 | |||
| Newark | Each (Supplied on Full Reel) | 1 | $ 0.55 | |
| 6000 | $ 0.55 | |||
Description
General part information
MIC94060 Series
The MIC94060-63 are high-side load switches designed for operation between 1.7V to 5.5V. The devices contain a low on-resistance P-channel MOSFET that supports over 2A of continuous current. The MIC94061and MIC94063 features an active load discharge circuit which insures capacitive loads retain no charge when the main switch is in an OFF state.
MIC94060-61 feature rapid turn on while MIC94062-63 provide a slew rate controlled Soft-Start turn-on of 800µs (typical) to prevent in-rush current from glitching supply rails.
An active pull-down on the enable input keeps MIC94060-63 in a default OFF state until the EN pin is pulled to a high level. Built-in level shift circuitry allows low voltage logic signals to switch higher supply voltages, or vice versa; high level logic signals can control low level voltages.
Documents
Technical documentation and resources
