STP16CPC26XTR
ActiveLED DRIVER, 16 OUTPUTS, CONSTANT CURRENT, 3V TO 5.5V IN, 30 MHZ SWITCH, 20V/90MA OUT, TSSOP-24
STP16CPC26XTR
ActiveLED DRIVER, 16 OUTPUTS, CONSTANT CURRENT, 3V TO 5.5V IN, 30 MHZ SWITCH, 20V/90MA OUT, TSSOP-24
Technical Specifications
Parameters and characteristics for this part
| Specification | STP16CPC26XTR |
|---|---|
| Applications | Lighting |
| Current - Output / Channel | 90 mA |
| Dimming | Analog |
| Frequency | 30 MHz |
| Internal Switch(s) | True |
| Mounting Type | Surface Mount |
| Number of Outputs | 16 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 0.173 in |
| Package / Case | Exposed Pad, 24-TSSOP |
| Package / Case [y] | 4.4 mm |
| Supplier Device Package | 24-TSSOP-EP |
| Topology | Shift Register |
| Type | Linear |
| Voltage - Output | 20 V |
| Voltage - Supply (Max) | 5.5 V |
| Voltage - Supply (Min) [Min] | 3 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.14 | |
| 10 | $ 0.83 | |||
| 25 | $ 0.75 | |||
| 100 | $ 0.66 | |||
| 250 | $ 0.62 | |||
| 500 | $ 0.59 | |||
| 1000 | $ 0.57 | |||
| Digi-Reel® | 1 | $ 1.14 | ||
| 10 | $ 0.83 | |||
| 25 | $ 0.75 | |||
| 100 | $ 0.66 | |||
| 250 | $ 0.62 | |||
| 500 | $ 0.59 | |||
| 1000 | $ 0.57 | |||
| Tape & Reel (TR) | 2500 | $ 0.55 | ||
| 5000 | $ 0.54 | |||
| 7500 | $ 0.53 | |||
| 12500 | $ 0.52 | |||
| 17500 | $ 0.52 | |||
| Newark | Each (Supplied on Cut Tape) | 1 | $ 1.14 | |
| 10 | $ 0.75 | |||
| 25 | $ 0.70 | |||
| 50 | $ 0.66 | |||
| 100 | $ 0.62 | |||
| 250 | $ 0.61 | |||
| 500 | $ 0.59 | |||
| 1000 | $ 0.57 | |||
Description
General part information
STP16CPC26 Series
The STP16CPC26 is a monolithic, low voltage, 16-bit constant current LED sink driver. The device contains a 16-bit shift register and data latches, which convert serial input data into parallel output format. In the output stage sixteen regulated current generators provide 5 mA to 90 mA constant current to drive LEDs. The current is externally adjusted through a resistor. LED brightness can be adjusted from 0% to 100% via OE pin.
The STP16CPC26 guarantees a 20 V driving capability, allowing users to connect more LEDs in series to each current source.
The high 30 MHz clock frequency makes the device suitable for high data rate transmission.
Documents
Technical documentation and resources
