TPS40007DGQ
Active2.25V-5.5V, 300 KHZ, SYNCHRONOUS BUCK CONTROLLER, SOURCE/ SINK, PREBIAS OPERATION
Deep-Dive with AI
Search across all available documentation for this part.
TPS40007DGQ
Active2.25V-5.5V, 300 KHZ, SYNCHRONOUS BUCK CONTROLLER, SOURCE/ SINK, PREBIAS OPERATION
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | TPS40007DGQ |
|---|---|
| Clock Sync | False |
| Control Features | Current Limit, Soft Start, Enable |
| Duty Cycle (Max) [Max] | 94 % |
| Frequency - Switching | 300 kHz |
| Function | Step-Down |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Positive |
| Output Phases | 1 |
| Output Type | Transistor Driver |
| Package / Case | 10-PowerTFSOP, 10-MSOP |
| Package / Case | 3 mm, 0.118 in |
| Supplier Device Package | 10-HVSSOP |
| Synchronous Rectifier | True |
| Topology | Buck |
| Voltage - Supply (Vcc/Vdd) [Max] | 5.5 V |
| Voltage - Supply (Vcc/Vdd) [Min] | 2.25 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tube | 1 | $ 2.44 | |
| 10 | $ 2.19 | |||
| 80 | $ 1.76 | |||
| 320 | $ 1.65 | |||
| 560 | $ 1.45 | |||
| 1040 | $ 1.20 | |||
| 2560 | $ 1.12 | |||
| 5040 | $ 1.07 | |||
| Texas Instruments | TUBE | 1 | $ 1.65 | |
| 100 | $ 1.45 | |||
| 250 | $ 1.01 | |||
| 1000 | $ 0.82 | |||
Description
General part information
TPS40007 Series
The TPS4000x are controllers for low-voltage, non-isolated synchronous buck regulators. These controllers drive an N-channel MOSFET for the primary buck switch, and an N-channel MOSFET for the synchronous rectifier switch, thereby achieving very high-efficiency power conversion. In addition, the device controls the delays from main switch off to rectifier turn-on and from rectifier turn-off to main switch turn-on in such a way as to minimize diode losses (both conduction and recovery) in the synchronous rectifier with TI’s proprietary Predictive Gate Drive™ technology. The reduction in these losses is significant and increases efficiency. For a given converter power level, smaller FETs can be used, or heat sinking can be reduced or even eliminated.
The current-limit threshold is adjustable with a single resistor connected to the device. The TPS4000x controllers implement a closed-loop soft start function. Startup ramp time is set by a single external capacitor connected to the SS/SD pin. The SS/SD pin is also used for shutdown.
The TPS4000x are controllers for low-voltage, non-isolated synchronous buck regulators. These controllers drive an N-channel MOSFET for the primary buck switch, and an N-channel MOSFET for the synchronous rectifier switch, thereby achieving very high-efficiency power conversion. In addition, the device controls the delays from main switch off to rectifier turn-on and from rectifier turn-off to main switch turn-on in such a way as to minimize diode losses (both conduction and recovery) in the synchronous rectifier with TI’s proprietary Predictive Gate Drive™ technology. The reduction in these losses is significant and increases efficiency. For a given converter power level, smaller FETs can be used, or heat sinking can be reduced or even eliminated.
Documents
Technical documentation and resources
