TCA39416DDFR
ActiveULTRA-LOW-VOLTAGE I3C TRANSLATOR WITH RISE TIME ACCELERATORS
Deep-Dive with AI
Search across all available documentation for this part.
TCA39416DDFR
ActiveULTRA-LOW-VOLTAGE I3C TRANSLATOR WITH RISE TIME ACCELERATORS
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | TCA39416DDFR |
|---|---|
| Channel Type | Bidirectional |
| Channels per Circuit | 2 |
| Data Rate | 26 Mbps |
| Mounting Type | Surface Mount |
| Number of Circuits | 1 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Output Type | Tri-State |
| Package / Case | SOT-23-8 Thin, TSOT-23-8 |
| Supplier Device Package | TSOT-23-8 |
| Translator Type | Voltage Level |
| Voltage - VCCA [Max] | 1.98 V |
| Voltage - VCCA [Min] | 0.72 V |
| Voltage - VCCB [Max] | 1.98 V |
| Voltage - VCCB [Min] | 0.72 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 0.90 | |
| 10 | $ 0.80 | |||
| 25 | $ 0.76 | |||
| 100 | $ 0.63 | |||
| 250 | $ 0.59 | |||
| 500 | $ 0.52 | |||
| 1000 | $ 0.41 | |||
| Digi-Reel® | 1 | $ 0.90 | ||
| 10 | $ 0.80 | |||
| 25 | $ 0.76 | |||
| 100 | $ 0.63 | |||
| 250 | $ 0.59 | |||
| 500 | $ 0.52 | |||
| 1000 | $ 0.41 | |||
| Tape & Reel (TR) | 3000 | $ 0.24 | ||
| 6000 | $ 0.22 | |||
| 15000 | $ 0.21 | |||
| 30000 | $ 0.20 | |||
| Texas Instruments | LARGE T&R | 1 | $ 0.40 | |
| 100 | $ 0.31 | |||
| 250 | $ 0.23 | |||
| 1000 | $ 0.16 | |||
Description
General part information
TCA39416 Series
The TCA39416 is a 2-bit bidirectional MIPI I3C v1.1.1, I 2C, SMBus and SPI voltage-level translator with an output enable (OE) input and rising and falling edge accelerators. It is operational from 0.72 V to 1.98 V on both the A-side and B-side with V CCA must be less than V CCB for proper operation. This limitation allows the device to interface between lower and higher logic signal levels at any of the typical 1-V, 1.2-V and 1.8-V supply rails.
The OE input pin is referenced to V CCA, can be tied directly to V CCA, but it is also 1.98-V tolerant. The OE pin can also be controlled and set to a logic low to place all the Ax (A1, A2) and Bx (B1, B2) pins in a high-impedance state, which significantly reduces the quiescent current consumption.
The TCA39416 is compatible with 12.5 MHz I3C speeds and also supports higher speed SPI applications with two devices. It also enables bidirectional voltage level translation for traditional I2C-bus/SMBus applications under normal I 2C and SMBus configurations.
Documents
Technical documentation and resources
