Zenode.ai Logo
Beta
20-SOIC
Integrated Circuits (ICs)

TRSF3222EIDWR

Obsolete
Texas Instruments

3- TO 5.5-V DUAL CHANNEL 1MBPS RS-232 LINE DRIVER/RECEIVER WITH +/-15-KV IEC-ESD PROTECTION

Deep-Dive with AI

Search across all available documentation for this part.

20-SOIC
Integrated Circuits (ICs)

TRSF3222EIDWR

Obsolete
Texas Instruments

3- TO 5.5-V DUAL CHANNEL 1MBPS RS-232 LINE DRIVER/RECEIVER WITH +/-15-KV IEC-ESD PROTECTION

Technical Specifications

Parameters and characteristics for this part

SpecificationTRSF3222EIDWR
Data Rate500 kbps
DuplexFull
Mounting TypeSurface Mount
Number of Drivers/Receivers [custom]2
Number of Drivers/Receivers [custom]2
Operating Temperature [Max]85 °C
Operating Temperature [Min]-40 °C
Package / Case20-SOIC
Package / Case [y]0.295 in
Package / Case [y]7.5 mm
ProtocolRS232
Receiver Hysteresis300 mV
Supplier Device Package20-SOIC
TypeTransceiver
Voltage - Supply [Max]5.5 V
Voltage - Supply [Min]3 V

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

DistributorPackageQuantity$
Texas InstrumentsLARGE T&R 1$ 2.59
100$ 2.27
250$ 1.59
1000$ 1.28

Description

General part information

TRSF3222E Series

The TRSF3222E consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND).

The TRSF3222E meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The TRSF3222E operates at typical data signaling rates up to 1000 kbit/s and is an improved drop-in replacement for industry-popular ’3222 two-driver, two-receiver functions.

The TRSF3222E can be placed in the power-down mode by setting the power-down (PWRDOWN) input low, which draws only 1 µA from the power supply. When the device is powered down, the receivers remain active while the drivers are placed in the high-impedance state. Also, during power down, the onboard charge pump is disabled; V+ is lowered to VCC, and V– is raised toward GND. Receiver outputs also can be placed in the high-impedance state by setting enable (EN) high.