Specification	TRSF3222EIPWR

Data Rate	500 kbps
Duplex	Full
Mounting Type	Surface Mount
Number of Drivers/Receivers [custom]	2
Number of Drivers/Receivers [custom]	2
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Package / Case	20-TSSOP
Package / Case [x]	0.173 in
Package / Case [y]	4.4 mm
Protocol	RS232
Receiver Hysteresis	300 mV
Supplier Device Package	20-TSSOP
Type	Transceiver
Voltage - Supply [Max]	5.5 V
Voltage - Supply [Min]	3 V

TRSF3222E Series

3- to 5.5-V dual channel 1Mbps RS-232 line driver/receiver with +/-15-kV IEC-ESD protection

Part	Data Rate	Type	Supplier Device Package	Mounting Type	Package / Case	Package / Case [y]	Package / Case [y]	Receiver Hysteresis	Number of Drivers/Receivers [custom]	Number of Drivers/Receivers [custom]	Duplex	Operating Temperature [Max]	Operating Temperature [Min]	Voltage - Supply [Max]	Voltage - Supply [Min]	Protocol	Package / Case [x]
Texas Instruments TRSF3222ECDWR	500 kbps	Transceiver	20-SOIC	Surface Mount	20-SOIC	0.295 in	7.5 mm	300 mV	2	2	Full	70 °C	0 °C	5.5 V	3 V	RS232
Texas Instruments TRSF3222EIPW	500 kbps	Transceiver	20-TSSOP	Surface Mount	20-TSSOP	4.4 mm		300 mV	2	2	Full	85 °C	-40 °C	5.5 V	3 V	RS232	0.173 in
Texas Instruments TRSF3222EIPWR	500 kbps	Transceiver	20-TSSOP	Surface Mount	20-TSSOP	4.4 mm		300 mV	2	2	Full	85 °C	-40 °C	5.5 V	3 V	RS232	0.173 in
Texas Instruments TRSF3222ECDB	500 kbps	Transceiver	20-SSOP	Surface Mount	20-SSOP			300 mV	2	2	Full	70 °C	0 °C	5.5 V	3 V	RS232
Texas Instruments TRSF3222EIDWR	500 kbps	Transceiver	20-SOIC	Surface Mount	20-SOIC	0.295 in	7.5 mm	300 mV	2	2	Full	85 °C	-40 °C	5.5 V	3 V	RS232
Texas Instruments TRSF3222EIPWG4	500 kbps	Transceiver	20-TSSOP	Surface Mount	20-TSSOP	4.4 mm		300 mV	2	2	Full	85 °C	-40 °C	5.5 V	3 V	RS232	0.173 in

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Cut Tape (CT)	1	$ 2.54
		10	$ 2.28
		25	$ 2.15
		100	$ 1.83
		250	$ 1.72
		500	$ 1.50
		1000	$ 1.25
	Digi-Reel®	1	$ 2.54
		10	$ 2.28
		25	$ 2.15
		100	$ 1.83
		250	$ 1.72
		500	$ 1.50
		1000	$ 1.25
	Tape & Reel (TR)	2000	$ 1.16
		6000	$ 1.12
Texas Instruments	LARGE T&R	1	$ 1.72
		100	$ 1.51
		250	$ 1.06
		1000	$ 0.85

Description

General part information

TRSF3222E Series

The TRSF3222E consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND).

The TRSF3222E meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The TRSF3222E operates at typical data signaling rates up to 1000 kbit/s and is an improved drop-in replacement for industry-popular ’3222 two-driver, two-receiver functions.

The TRSF3222E can be placed in the power-down mode by setting the power-down (PWRDOWN) input low, which draws only 1 µA from the power supply. When the device is powered down, the receivers remain active while the drivers are placed in the high-impedance state. Also, during power down, the onboard charge pump is disabled; V+ is lowered to VCC, and V– is raised toward GND. Receiver outputs also can be placed in the high-impedance state by setting enable (EN) high.