SN74AUC126RGYR
Active4-CH, 0.8-V TO 2.7-V HIGH SPEED BUFFERS WITH 3-STATE OUTPUTS
Deep-Dive with AI
Search across all available documentation for this part.
SN74AUC126RGYR
Active4-CH, 0.8-V TO 2.7-V HIGH SPEED BUFFERS WITH 3-STATE OUTPUTS
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | SN74AUC126RGYR |
|---|---|
| Current - Output High, Low [custom] | 9 mA |
| Current - Output High, Low [custom] | 9 mA |
| Logic Type | Buffer, Non-Inverting |
| Mounting Type | Surface Mount |
| Number of Bits per Element | 1 |
| Number of Elements | 4 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Output Type | 3-State |
| Package / Case | 14-VFQFN Exposed Pad |
| Supplier Device Package | 14-VQFN (3.5x3.5) |
| Voltage - Supply [Max] | 2.7 V |
| Voltage - Supply [Min] | 0.8 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.85 | |
| 10 | $ 1.18 | |||
| 25 | $ 1.00 | |||
| 100 | $ 0.80 | |||
| 250 | $ 0.70 | |||
| 500 | $ 0.64 | |||
| 1000 | $ 0.59 | |||
| Digi-Reel® | 1 | $ 1.85 | ||
| 10 | $ 1.18 | |||
| 25 | $ 1.00 | |||
| 100 | $ 0.80 | |||
| 250 | $ 0.70 | |||
| 500 | $ 0.64 | |||
| 1000 | $ 0.59 | |||
| Tape & Reel (TR) | 3000 | $ 0.53 | ||
| 6000 | $ 0.50 | |||
| 9000 | $ 0.48 | |||
| 15000 | $ 0.46 | |||
| 21000 | $ 0.45 | |||
| Texas Instruments | LARGE T&R | 1 | $ 0.88 | |
| 100 | $ 0.68 | |||
| 250 | $ 0.50 | |||
| 1000 | $ 0.36 | |||
Description
General part information
SN74AUC126 Series
This quadruple bus buffer gate is designed for 0.8-V to 2.7-V VCCoperation, but is designed specifically for 1.6-V to 1.95-V VCCoperation.
The SN74AUC126 contains four independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE) input is low.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
Documents
Technical documentation and resources