TXS0108EQPWRQ1
ActiveAUTOMOTIVE EIGHT-BIT BIDIRECTIONAL VOLTAGE LEVEL SHIFTER FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS
Deep-Dive with AI
Search across all available documentation for this part.
TXS0108EQPWRQ1
ActiveAUTOMOTIVE EIGHT-BIT BIDIRECTIONAL VOLTAGE LEVEL SHIFTER FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS
Technical Specifications
Parameters and characteristics for this part
| Specification | TXS0108EQPWRQ1 |
|---|---|
| Channel Type | Bidirectional |
| Channels per Circuit | 8 |
| Data Rate | 110 MBd |
| Features | Auto-Direction Sensing |
| Grade | Automotive |
| Mounting Type | Surface Mount |
| Number of Circuits | 1 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Output Type | Open Drain, Push-Pull |
| Package / Case | 20-TSSOP |
| Package / Case [x] | 0.173 in |
| Package / Case [y] | 4.4 mm |
| Qualification | AEC-Q100 |
| Supplier Device Package | 20-TSSOP |
| Translator Type | Voltage Level |
| Voltage - VCCA [Max] | 3.6 V |
| Voltage - VCCA [Min] | 1.4 V |
| Voltage - VCCB [Max] | 5.5 V |
| Voltage - VCCB [Min] | 1.65 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 2.53 | |
| 10 | $ 1.63 | |||
| 25 | $ 1.39 | |||
| 100 | $ 1.13 | |||
| 250 | $ 1.00 | |||
| 500 | $ 0.92 | |||
| 1000 | $ 0.85 | |||
| Digi-Reel® | 1 | $ 2.53 | ||
| 10 | $ 1.63 | |||
| 25 | $ 1.39 | |||
| 100 | $ 1.13 | |||
| 250 | $ 1.00 | |||
| 500 | $ 0.92 | |||
| 1000 | $ 0.85 | |||
| Tape & Reel (TR) | 2000 | $ 0.80 | ||
| 4000 | $ 0.75 | |||
| 6000 | $ 0.73 | |||
| 10000 | $ 0.70 | |||
| 14000 | $ 0.69 | |||
| Texas Instruments | LARGE T&R | 1 | $ 1.23 | |
| 100 | $ 1.01 | |||
| 250 | $ 0.73 | |||
| 1000 | $ 0.55 | |||
Description
General part information
TXS0108E-Q1 Series
This device is an 8-bit non-inverting level translator which uses two separate configurable power-supply rails. The A port tracks the VCCA pin supply voltage. The VCCA pin accepts any supply voltage between 1.4V and 3.6V. The B port tracks the VCCB pin supply voltage. The VCCB pin accepts any supply voltage between 1.65V and 5.5V. Two input supply pins allows for low Voltage bidirectional translation between any of the 1.5V, 1.8V, 2.5V, 3.3V, and 5V voltage nodes.
When the output-enable (OE) input is low, all outputs are placed in the high-impedance (Hi-Z) state.
To put the device in the Hi-Z state during power-up or power-down periods, tie OE to GND through a pull-down resistor. The current-sourcing capability of the driver determines the minimum value of the resistor.
Documents
Technical documentation and resources
