Integrated Circuits (ICs)

TPS63060DSCR

Active

2.5V TO 12V INPUT VOLTAGE, 93% EFFICIENT, 2.25A SWITCH CURRENT LIMIT, BUCK-BOOST CONVERTER

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsIQ: What it is, what it isn’t, and how to use it Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs +19

Integrated Circuits (ICs)

TPS63060DSCR

Active

Texas Instruments

2.5V TO 12V INPUT VOLTAGE, 93% EFFICIENT, 2.25A SWITCH CURRENT LIMIT, BUCK-BOOST CONVERTER

Deep-Dive with AI

DocumentsIQ: What it is, what it isn’t, and how to use it Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs +19

Specifications Series Pricing Description Documents

Technical Specifications

Parameters and characteristics for this part

Specification	TPS63060DSCR

Current - Output	2 A
Frequency - Switching	2.4 MHz
Function	Step-Up/Step-Down
Mounting Type	Surface Mount
Number of Outputs	1
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Output Configuration	Positive
Output Type	Adjustable
Package / Case	10-WFDFN Exposed Pad
Supplier Device Package	10-WSON (3x3)
Synchronous Rectifier	True
Topology	Buck-Boost
Voltage - Input (Max) [Max]	12 V
Voltage - Input (Min) [Min]	2.5 V
Voltage - Output (Max) [Max]	8 V
Voltage - Output (Min/Fixed)	2.5 V

TPS63060-EP Series

HIGH INPUT VOLTAGE BUCK-BOOST CONVERTER WITH 2-A SWITCH CURRENT

Part	Package / Case	Topology	Mounting Type	Current - Output	Number of Outputs	Voltage - Input (Min) [Min]	Function	Voltage - Output (Max) [Max]	Voltage - Input (Max) [Max]	Supplier Device Package	Output Configuration	Voltage - Output (Min/Fixed)	Frequency - Switching	Operating Temperature [Max]	Operating Temperature [Min]	Output Type	Main Purpose	Outputs and Type	Outputs and Type	Voltage - Output	Supplied Contents	Regulator Topology	Voltage - Input [Min]	Voltage - Input [Max]	Board Type
Texas Instruments TPS63060DSCT	10-WFDFN Exposed Pad	Buck-Boost	Surface Mount	2 A	1	2.5 V	Step-Up/Step-Down	8 V	12 V	10-WSON (3x3)	Positive	2.5 V	2.4 MHz	85 °C	-40 °C	Adjustable
Texas Instruments V62/14602-01XE	10-WFDFN Exposed Pad	Buck-Boost	Surface Mount	2 A	1	2.5 V	Step-Up/Step-Down	8 V	12 V	10-WSON (3x3)	Positive	2.5 V	2.4 MHz	125 ¯C	-55 °C	Adjustable
Texas Instruments TPS63060DSCR	10-WFDFN Exposed Pad	Buck-Boost	Surface Mount	2 A	1	2.5 V	Step-Up/Step-Down	8 V	12 V	10-WSON (3x3)	Positive	2.5 V	2.4 MHz	85 °C	-40 °C	Adjustable
Texas Instruments TPS63060EVM-619				800 mA									2.4 MHz				DC/DC Step Up or Down	Non-Isolated	1	5 V	Board(s)	Buck-Boost	2.5 V	12 V	Fully Populated
Texas Instruments TPS63060MDSCTEP	10-WFDFN Exposed Pad	Buck-Boost	Surface Mount	2 A	1	2.5 V	Step-Up/Step-Down	8 V	12 V	10-WSON (3x3)	Positive	2.5 V	2.4 MHz	125 ¯C	-55 °C	Adjustable

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Cut Tape (CT)	1	$ 2.70
		10	$ 2.42
		25	$ 2.29
		100	$ 1.95
		250	$ 1.83
		500	$ 1.60
		1000	$ 1.33
	Digi-Reel®	1	$ 2.70
		10	$ 2.42
		25	$ 2.29
		100	$ 1.95
		250	$ 1.83
		500	$ 1.60
		1000	$ 1.33
	Tape & Reel (TR)	3000	$ 1.24
		6000	$ 1.19
Newark	Each (Supplied on Cut Tape)	1	$ 2.96
		10	$ 2.84
		25	$ 2.69
		50	$ 2.58
		100	$ 2.46
		250	$ 2.39
		500	$ 2.33
		1000	$ 2.29
Texas Instruments	LARGE T&R	1	$ 2.03
		100	$ 1.68
		250	$ 1.20
		1000	$ 0.91

Description

General part information

TPS63060-EP Series

The TPS63060 provides a power supply solution for products powered by either three-cell up to six-cell alkaline, NiCd or NiMH battery, or a one-cell or dual-cell Li-Ion or Li-polymer battery. Output currents can go as high as 2A while using a dual-cell Li-Ion or Li-Polymer Battery, and discharge it down to 5V or lower. The buck-boost converter is based on a fixed frequency, pulse-width-modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters Power Save mode to maintain high efficiency over a wide load current range. The Power Save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 2.25A. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery. The device is packaged in a 10-pin SON PowerPAD package measuring 3mm × 3mm (DSC).