MIC94300YMT-TR
ActivePWR LOAD SW, HIGH SIDE, -40 TO 125DEG C
Deep-Dive with AI
Search across all available documentation for this part.
MIC94300YMT-TR
ActivePWR LOAD SW, HIGH SIDE, -40 TO 125DEG C
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | MIC94300YMT-TR |
|---|---|
| Current - Output (Max) [Max] | 200 mA |
| Fault Protection | Over Temperature, Current Limiting (Fixed) |
| Input Type | Non-Inverting |
| Interface | On/Off |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 125 ¯C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | High Side |
| Output Type | N-Channel |
| Package / Case | 4-TMLF®, 4-UFDFN Exposed Pad |
| Ratio - Input:Output [custom] | 1:1 |
| Supplier Device Package | 4-TMLF® (1.2x1.6) |
| Switch Type | General Purpose |
| Voltage - Load [Max] | 3.6 V |
| Voltage - Load [Min] | 1.8 V |
| Voltage - Supply (Vcc/Vdd) | False |
MIC94300 Series
200mA Ripple Blocker, Voltage Follower
| Part | Switch Type | Operating Temperature [Min] | Operating Temperature [Max] | Fault Protection | Current - Output (Max) [Max] | Input Type | Ratio - Input:Output [custom] | Mounting Type | Voltage - Supply (Vcc/Vdd) | Number of Outputs | Package / Case | Output Configuration | Voltage - Load [Min] | Voltage - Load [Max] | Output Type | Supplier Device Package | Interface |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Microchip Technology | General Purpose | -40 °C | 125 ¯C | Current Limiting (Fixed) Over Temperature | 200 mA | Non-Inverting | 1:1 | Surface Mount | 1 | 4-TMLF® 4-UFDFN Exposed Pad | High Side | 1.8 V | 3.6 V | N-Channel | 4-TMLF® (1.2x1.6) | On/Off | |
Microchip Technology | General Purpose | -40 °C | 125 ¯C | Current Limiting (Fixed) Over Temperature | 200 mA | Non-Inverting | 1:1 | Surface Mount | 1 | 4-TMLF® 4-UFDFN Exposed Pad | High Side | 1.8 V | 3.6 V | N-Channel | 4-TMLF® (1.2x1.6) | On/Off |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 0.37 | |
| 25 | $ 0.31 | |||
| 100 | $ 0.27 | |||
| Digi-Reel® | 1 | $ 0.37 | ||
| 25 | $ 0.31 | |||
| 100 | $ 0.27 | |||
| Tape & Reel (TR) | 5000 | $ 0.27 | ||
| Microchip Direct | T/R | 1 | $ 0.37 | |
| 25 | $ 0.31 | |||
| 100 | $ 0.27 | |||
| 1000 | $ 0.26 | |||
| Newark | Each (Supplied on Cut Tape) | 1 | $ 0.54 | |
Description
General part information
MIC94300 Series
The MIC94300 is an integrated load switch that incorporates Ripple Blocker™ active filter technology. The MIC94300 provides high-frequency ripple attenuation (switching noise rejection) for applications where a switching noise cannot be tolerated by sensitive downstream circuits such as in RF applications. A low-voltage logic enable pin disconnects the pass element and places the MIC94300 into a low current-shutdown state when disabled.
The MIC94300 operates from an input voltage of 1.8V to 3.6V, allowing true load switching of low-voltage power rails in any electronic device. The output voltage (VOUT) is set at a fixed drop (typically 170mV) from the input voltage (VOUT = VIN– 170mV). This maintains high efficiency independent of given load conditions and currents.
Documents
Technical documentation and resources