REG711EA-5/250
ActiveCHARGE PUMP STPUP/STPDN 5V 50MA 8-PIN VSSOP T/R
Deep-Dive with AI
Search across all available documentation for this part.
REG711EA-5/250
ActiveCHARGE PUMP STPUP/STPDN 5V 50MA 8-PIN VSSOP T/R
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | REG711EA-5/250 |
|---|---|
| Current - Output | 50 mA |
| Frequency - Switching | 1 MHz |
| Function | Step-Up/Step-Down |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Positive |
| Output Type | 1.81 mOhm |
| Package / Case | 8-MSOP, 8-TSSOP |
| Package / Case | 3 mm |
| Package / Case [custom] | 0.118 in |
| Synchronous Rectifier | False |
| Voltage - Input (Max) [Max] | 5.5 V |
| Voltage - Input (Min) [Min] | 2.7 V |
| Voltage - Output (Min/Fixed) | 5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 2.39 | |
| 10 | $ 1.54 | |||
| 25 | $ 1.31 | |||
| 100 | $ 1.06 | |||
| Digi-Reel® | 1 | $ 2.39 | ||
| 10 | $ 1.54 | |||
| 25 | $ 1.31 | |||
| 100 | $ 1.06 | |||
| Tape & Reel (TR) | 250 | $ 0.94 | ||
| 500 | $ 0.86 | |||
| 750 | $ 0.82 | |||
| 1250 | $ 0.78 | |||
| 1750 | $ 0.76 | |||
| 2500 | $ 0.73 | |||
| 6250 | $ 0.68 | |||
| 12500 | $ 0.65 | |||
| Texas Instruments | SMALL T&R | 1 | $ 1.14 | |
| 100 | $ 0.94 | |||
| 250 | $ 0.68 | |||
| 1000 | $ 0.51 | |||
Description
General part information
REG711-25 Series
The REG711 is a switched capacitor voltage converter, which produces a regulated, low ripple output voltage from an unregulated input voltage. A wide input supply voltage of 1.8V to 5.5V makes the REG711 ideal for a variety of battery sources, such as single cell Li-Ion, or two and three cell Nickel or Alkaline based chemistries.
The input voltage may vary above and below the output voltage and the output will remain in regulation. It works equally well for step up or down without the need for an inductor, providing low EMI DC/DC conversion. The high switching frequency allows the use of small surface-mount capacitors, saving board space and reducing cost. The REG711 is thermally protected and current limited, protecting the load and the regulator during fault conditions. Typical ground pin current (quiescent current) is 1mA at full load, 60uA with no load, and less than 1uA in shutdown mode. This regulator comes in a thin MSOP-8 package with a component height of less than 1.1mm.
The REG711 is a switched capacitor voltage converter, which produces a regulated, low ripple output voltage from an unregulated input voltage. A wide input supply voltage of 1.8V to 5.5V makes the REG711 ideal for a variety of battery sources, such as single cell Li-Ion, or two and three cell Nickel or Alkaline based chemistries.
Documents
Technical documentation and resources
