Zenode.ai Logo
Beta
16 TSSOP
Integrated Circuits (ICs)

AD7994BRUZ-0REEL

Active
Analog Devices

4 CHANNEL, 12-BIT ADC WITH I2C COMPATIBLE INTERFACE IN 16-LEAD TSSOP

Deep-Dive with AI

Search across all available documentation for this part.

16 TSSOP
Integrated Circuits (ICs)

AD7994BRUZ-0REEL

Active
Analog Devices

4 CHANNEL, 12-BIT ADC WITH I2C COMPATIBLE INTERFACE IN 16-LEAD TSSOP

Technical Specifications

Parameters and characteristics for this part

SpecificationAD7994BRUZ-0REEL
ArchitectureSAR
ConfigurationMUX-S/H-ADC
Data InterfaceI2C
Input TypeSingle Ended
Mounting TypeSurface Mount
Number of A/D Converters1
Number of Bits12 bits
Number of Inputs4
Operating Temperature [Max]125 °C
Operating Temperature [Min]-40 °C
Package / Case16-TSSOP
Package / Case [x]0.173 in
Package / Case [y]4.4 mm
Ratio - S/H:ADC1:1
Reference TypeExternal
Sampling Rate (Per Second)188 k per second
Supplier Device Package16-TSSOP
Voltage - Supply, Analog [Max]5.5 V
Voltage - Supply, Analog [Min]2.7 V
Voltage - Supply, Digital [Max]5.5 V
Voltage - Supply, Digital [Min]2.7 V

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

DistributorPackageQuantity$
DigikeyCut Tape (CT) 1$ 15.06
10$ 10.75
25$ 9.64
100$ 8.40
250$ 7.80
500$ 7.43
1000$ 7.30
Digi-Reel® 1$ 15.06
10$ 10.75
25$ 9.64
100$ 8.40
250$ 7.80
500$ 7.43
1000$ 7.30
Tape & Reel (TR) 2500$ 7.30

Description

General part information

AD7994 Series

The AD7994 is a 4-channel, 10- and 12-bit, low power, successive approximation ADCs with an I2C-compatible interface. The parts operate from a single 2.7 V to 5.5 V power supply and feature a 2 µs conversion time. The parts contain a 4-channel multiplexer and track-and-hold amplifier that can handle input frequencies up to 11 MHz.The AD7994 provides a two-wire serial interface which is compatible with I2C interfaces. The part comes in two versions, AD7994-0 and AD7994-1. Each version allows for a minimum of two different I2C addresses. The I2C interface on the AD7994-0 supports Standard and Fast I2C Interface Modes. The I2C interface on the AD7994-1 supports Standard, Fast and two High-Speed I2C Interface Modes.The AD7994 normally remain in a shutdown state while not converting, and power up only for conversions. The conversion process can be controlled using theCONVSTpin, by a command mode where conversions occur across I2C write operations, or an automatic conversion interval mode selected through software control.The AD7994 require an external reference that should be applied to the REFINpin and can be in the range of 1.2 V to VDD. This allows the widest dynamic input range to the ADC.On-chip limit registers can be programmed with high and low limits for the conversion result, and an open-drain, out-of-range indicator output (ALERT) becomes active when the programmed high or low limits are violated by the conversion result. This output can be used as an interrupt.PRODUCT HIGHLIGHTS2 µs conversion time with low power consumption.I2C-compatible serial interface with pin-selectable addresses. TwoAD7993/ AD7994 versions allow five AD7993 / AD7994 devices to be connected to the same serial bus.The parts feature automatic shutdown while not converting to maximize power efficiency. Current consumption is 1 µA max when in shutdown mode.Reference can be driven up to the power supply.Out-of-range indicator that can be software disabled or enabled.One-shot and automatic conversion rates.Registers can store minimum and maximum conversion results.