
MIC5213-3.6YC5-TR
Active80MA UCAP LDO 5 SC70 - T/R ROHS COMPLIANT: YES
Deep-Dive with AI
Search across all available documentation for this part.

MIC5213-3.6YC5-TR
Active80MA UCAP LDO 5 SC70 - T/R ROHS COMPLIANT: YES
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | MIC5213-3.6YC5-TR |
|---|---|
| Control Features | Enable |
| Current - Output | 80 mA |
| Current - Quiescent (Iq) | 750 µA |
| Current - Supply (Max) [Max] | 3 mA |
| Mounting Type | Surface Mount |
| Number of Regulators | 1 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Positive |
| Output Type | 1.81 mOhm |
| Package / Case | SC-70-5, 5-TSSOP, SOT-353 |
| Protection Features | Over Temperature, Reverse Polarity, Over Current |
| Supplier Device Package | SC-70-5 |
| Voltage - Input (Max) [Max] | 16 V |
| Voltage - Output (Min/Fixed) | 3.6 V |
| Voltage Dropout (Max) [Max] | 0.6 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 0.58 | |
| 25 | $ 0.49 | |||
| 100 | $ 0.45 | |||
| Digi-Reel® | 1 | $ 0.58 | ||
| 25 | $ 0.49 | |||
| 100 | $ 0.45 | |||
| Tape & Reel (TR) | 3000 | $ 0.45 | ||
| Microchip Direct | T/R | 1 | $ 0.58 | |
| 25 | $ 0.49 | |||
| 100 | $ 0.45 | |||
| 1000 | $ 0.43 | |||
| 5000 | $ 0.42 | |||
| Newark | Each (Supplied on Full Reel) | 100 | $ 0.48 | |
Description
General part information
MIC5213 Series
The MIC5213 is a µCap 80mA linear voltage regulator in the Teeny™ SC-70 package. Featuring half the footprint of the standard SOT-23 package, this Teeny™ SC-70 regulator has very low dropout voltage (typically 20mV at light loads and 300mV at 80mA) and very low ground current (225µA at 20mA output). It also offers better than 3% initial accuracy and includes a logic-compatible enable input.
The µCap regulator design is optimized to work with low-value, low-cost ceramic capacitors. The outputs typically require only 0.47µF of output capacitance for stability.
Designed especially for handheld, battery-powered devices, the MIC5213 can be controlled by a CMOS- or TTL-compatible logic signal. When disabled, power consumption drops nearly to zero. If on-off control is not required, the enable pin may be tied to the input for 3-terminal operation. The ground current of the MIC5213 increases only slightly in dropout, further prolonging battery life. Key MIC5213 features include current limiting, over-temperature shutdown, and protection against reversed battery.
Documents
Technical documentation and resources