Specification	ADM488ABRMZ

Data Rate	250 KBd
Duplex	Full
Mounting Type	Surface Mount
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Package / Case	8-MSOP, 8-TSSOP
Package / Case	3 mm
Package / Case [custom]	0.118 in
Protocol	RS422, RS485
Receiver Hysteresis	70 mV
Supplier Device Package	8-MSOP
Type	Transceiver
Voltage - Supply [Max]	5.5 V
Voltage - Supply [Min]	4.5 V

ADM488A Series

5 V, Slew-Rate Limited, Low Power, 250 kbps, Full Duplex EIA RS-485 Transceiver

Part	Receiver Hysteresis	Voltage - Supply [Min]	Voltage - Supply [Max]	Duplex	Supplier Device Package	Package / Case	Package / Case	Package / Case	Protocol	Data Rate	Operating Temperature [Max]	Operating Temperature [Min]	Mounting Type	Type	Package / Case [custom]	Package / Case [y]	Package / Case [x]
Analog Devices ADM488ANZ	70 mV	4.5 V	5.5 V	Full	8-PDIP	0.3 in	8-DIP	7.62 mm	RS422 RS485	250 KBd	85 °C	-40 °C	Through Hole	Transceiver
Analog Devices ADM488ABRMZ	70 mV	4.5 V	5.5 V	Full	8-MSOP	3 mm	8-MSOP 8-TSSOP		RS422 RS485	250 KBd	85 °C	-40 °C	Surface Mount	Transceiver	0.118 in
Analog Devices ADM488ARZ-REEL7	70 mV	4.5 V	5.5 V	Full	8-SOIC		8-SOIC		RS422 RS485	250 KBd	85 °C	-40 °C	Surface Mount	Transceiver		3.9 mm	0.154 in
Analog Devices ADM488ABRZ	70 mV	4.5 V	5.5 V	Full	8-SOIC		8-SOIC		RS422 RS485	250 KBd	85 °C	-40 °C	Surface Mount	Transceiver		3.9 mm	0.154 in
Analog Devices ADM488ARZ-REEL	70 mV	4.5 V	5.5 V	Full	8-SOIC		8-SOIC		RS422 RS485	250 KBd	85 °C	-40 °C	Surface Mount	Transceiver		3.9 mm	0.154 in
Analog Devices ADM488ABRZ-REEL7	70 mV	4.5 V	5.5 V	Full	8-SOIC		8-SOIC		RS422 RS485	250 KBd	85 °C	-40 °C	Surface Mount	Transceiver		3.9 mm	0.154 in

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Tube	1	$ 4.28
		10	$ 2.83
		25	$ 2.45
		100	$ 2.03
		250	$ 1.82
		500	$ 1.70
		1000	$ 1.59
		2500	$ 1.48
		5000	$ 1.41

Description

General part information

ADM488A Series

The ADM488A andADM489Aare low power, differential line transceivers suitable for communication on multipoint bus transmission lines. They are intended for balanced data transmission and comply with both RS-485 and RS-422 standards of the Electronics Industries Association (EIA). Both products contain a single differential line driver and a single differential line receiver, making them suitable for full-duplex data transfer. The ADM489A contains an additional receiver and driver enable control.The input impedance is 12 kΩ, allowing 32 transceivers to be connected on the bus. The ADM488A / ADM489A operate from a single 5 V ± 10% power supply.Excessive power dissipation that is caused by bus contention or output shorting is prevented by a thermal shutdown circuit. This feature forces the driver output into a high impedance state if, during fault conditions, a significant temperature increase is detected in the internal driver circuitry. The receiver contains a fail-safe feature that results in a logic high output state if the inputs are unconnected (floating).The ADM488A / ADM489A are fabricated on BiCMOS, an advanced mixed technology process combining low power CMOS with fast switching bipolar technology.The ADM488A / ADM489A are fully specified over the industrial temperature range and are available in SOIC and MSOP packages.APPLICATIONSLow power RS-485 and RS-422 systemsDTE-DCE interfacePacket switchingLocal area networksData concentrationData multiplexersIntegrated services digital network (ISDN)