INA240A3QPWRQ1
ActiveAEC-Q100, -4 TO 80V, BI-DIRECTIONAL, ULTRA-PRECISE CURRENT SENSE AMPLIFIER W/ ENHANCED PWM REJECTION
Deep-Dive with AI
Search across all available documentation for this part.
INA240A3QPWRQ1
ActiveAEC-Q100, -4 TO 80V, BI-DIRECTIONAL, ULTRA-PRECISE CURRENT SENSE AMPLIFIER W/ ENHANCED PWM REJECTION
Technical Specifications
Parameters and characteristics for this part
| Specification | INA240A3QPWRQ1 |
|---|---|
| -3db Bandwidth | 400 kHz |
| Amplifier Type | Current Sense |
| Current - Input Bias | 90 µA |
| Current - Supply | 1.8 mA |
| Grade | Automotive |
| Mounting Type | Surface Mount |
| Number of Circuits | 1 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 8-TSSOP |
| Package / Case [custom] | 0.173 " |
| Package / Case [custom] | 4.4 mm |
| Qualification | AEC-Q100 |
| Slew Rate | 2 V/µs |
| Supplier Device Package | 8-TSSOP |
| Voltage - Input Offset | 5 çV |
| Voltage - Supply Span (Max) [Max] | 5.5 V |
| Voltage - Supply Span (Min) [Min] | 2.7 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 3.81 | |
| 10 | $ 3.42 | |||
| 25 | $ 3.24 | |||
| 100 | $ 2.81 | |||
| 250 | $ 2.66 | |||
| 500 | $ 2.39 | |||
| 1000 | $ 2.01 | |||
| Digi-Reel® | 1 | $ 3.81 | ||
| 10 | $ 3.42 | |||
| 25 | $ 3.24 | |||
| 100 | $ 2.81 | |||
| 250 | $ 2.66 | |||
| 500 | $ 2.39 | |||
| 1000 | $ 2.01 | |||
| Tape & Reel (TR) | 2000 | $ 1.91 | ||
| Texas Instruments | LARGE T&R | 1 | $ 2.51 | |
| 100 | $ 2.07 | |||
| 250 | $ 1.49 | |||
| 1000 | $ 1.12 | |||
Description
General part information
INA240-Q1 Series
The INA240 -Q1 device is an automotive-qualified, voltage-output, current-sense amplifier with enhanced PWM rejection that can sense drops across shunt resistors over a wide common-mode voltage range from –4 V to 80 V, independent of the supply voltage. The negative common-mode voltage allows the device to operate below ground, accommodating the flyback period of typical solenoid applications. Enhanced PWM rejection provides high levels of suppression for large common-mode transients (ΔV/Δt) in systems that use pulse width modulation (PWM) signals (such as motor drives and solenoid control systems). This feature allows for accurate current measurements without large transients and associated recovery ripple on the output voltage.
This device operates from a single 2.7-V to 5.5-V power supply, drawing a maximum of 2.4 mA of supply current. Four fixed gains are available: 20 V/V, 50 V/V, 100 V/V, and 200 V/V. The low offset of the zero-drift architecture enables current sensing with maximum drops across the shunt as low as 10-mV full-scale. Grade 1 versions are specified over the extended operating temperature range (–40°C to +125°C) and are offered in an 8-pin TSSOP and 8-pin SOIC packages. Grade 0 versions are specified over the extended operating temperature range (–40°C to +150°C) and are offered in an 8-pin SOIC package.
The INA240 -Q1 device is an automotive-qualified, voltage-output, current-sense amplifier with enhanced PWM rejection that can sense drops across shunt resistors over a wide common-mode voltage range from –4 V to 80 V, independent of the supply voltage. The negative common-mode voltage allows the device to operate below ground, accommodating the flyback period of typical solenoid applications. Enhanced PWM rejection provides high levels of suppression for large common-mode transients (ΔV/Δt) in systems that use pulse width modulation (PWM) signals (such as motor drives and solenoid control systems). This feature allows for accurate current measurements without large transients and associated recovery ripple on the output voltage.
Documents
Technical documentation and resources
