Specification	SN65LBC175DR

Mounting Type	Surface Mount
Number of Drivers/Receivers [custom]	0
Number of Drivers/Receivers [custom]	4
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Package / Case	16-SOIC
Package / Case [x]	0.154 in
Package / Case [y]	3.9 mm
Protocol	RS423, RS485, RS422
Receiver Hysteresis	45 mV
Supplier Device Package	16-SOIC
Type	Receiver
Voltage - Supply [Max]	5.25 V
Voltage - Supply [Min]	4.75 V

SN65LBC175A-EP Series

Quadruple Low-Power Differential Line Receiver

Part	Operating Temperature [Max]	Operating Temperature [Min]	Protocol	Voltage - Supply [Min]	Voltage - Supply [Max]	Package / Case	Package / Case [x]	Package / Case [y]	Supplier Device Package	Mounting Type	Data Rate	Receiver Hysteresis	Type	Number of Drivers/Receivers [custom]
Texas Instruments SN65LBC175ADR	85 °C	-40 °C	RS422 RS423 RS485	4.75 V	5.25 V	16-SOIC	0.154 in	3.9 mm	16-SOIC	Surface Mount	50 Mbps	40 mV	Receiver	4
Texas Instruments SN65LBC175D	85 °C	-40 °C	RS422 RS423 RS485	4.75 V	5.25 V	16-SOIC	0.154 in	3.9 mm	16-SOIC	Surface Mount	50 Mbps	40 mV	Receiver	4
Texas Instruments V62/17603-01XE	85 °C	-40 °C	RS422 RS485	4.75 V	5.25 V	16-SOIC	0.154 in	3.9 mm	16-SOIC	Surface Mount	50 Mbps	40 mV	Receiver	4
Texas Instruments SN65LBC175DRG4	85 °C	-40 °C	RS422 RS423 RS485	4.75 V	5.25 V	16-SOIC	0.154 in	3.9 mm	16-SOIC	Surface Mount		45 mV	Receiver	4
Texas Instruments SN65LBC175DW	85 °C	-40 °C	RS422 RS423 RS485	4.75 V	5.25 V	16-SOIC	0.295 in	7.5 mm	16-SOIC	Surface Mount	50 Mbps	40 mV	Receiver	4
Texas Instruments SN65LBC175ADG4	85 °C	-40 °C	RS422 RS423 RS485	4.75 V	5.25 V	16-SOIC	0.154 in	3.9 mm	16-SOIC	Surface Mount	50 Mbps	40 mV	Receiver	4
Texas Instruments SN65LBC175AD	85 °C	-40 °C	RS422 RS423 RS485	4.75 V	5.25 V	16-SOIC	0.154 in	3.9 mm	16-SOIC	Surface Mount	50 Mbps	40 mV	Receiver	4
Texas Instruments SN65LBC175DWG4	85 °C	-40 °C	RS422 RS423 RS485	4.75 V	5.25 V	16-SOIC	0.295 in	7.5 mm	16-SOIC	Surface Mount	50 Mbps	40 mV	Receiver	4
Texas Instruments SN65LBC175DR	85 °C	-40 °C	RS422 RS423 RS485	4.75 V	5.25 V	16-SOIC	0.154 in	3.9 mm	16-SOIC	Surface Mount		45 mV	Receiver	4
Texas Instruments SN65LBC175AMDREP	85 °C	-40 °C	RS422 RS423 RS485	4.75 V	5.25 V	16-SOIC	0.154 in	3.9 mm	16-SOIC	Surface Mount	50 Mbps	40 mV	Receiver	4

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Cut Tape (CT)	1	$ 3.79
		10	$ 3.40
		25	$ 3.22
		100	$ 2.79
		250	$ 2.64
		500	$ 2.37
		1000	$ 2.00
	Digi-Reel®	1	$ 3.79
		10	$ 3.40
		25	$ 3.22
		100	$ 2.79
		250	$ 2.64
		500	$ 2.37
		1000	$ 2.00
	Tape & Reel (TR)	2500	$ 1.90
		5000	$ 1.83
Texas Instruments	LARGE T&R	1	$ 2.86
		100	$ 2.50
		250	$ 1.76
		1000	$ 1.42

Description

General part information

SN65LBC175A-EP Series

The SN65LBC175 and SN75LBC175 are monolithic, quadruple, differential line receivers with 3-state outputs designed to meet the requirements of the EIA standards RS-422-A, RS-423-A, RS-485, and CCITT Recommendation V.11. The devices are optimized for balanced multipoint bus transmission at data rates up to and exceeding 10 million bits per second. The receivers are enabled in pairs, with an active-high enable input. Each differential receiver input features high impedance, hysteresis for increased noise immunity, and sensitivity of ±200 mV over a common-mode input voltage range of 12 V to −7 V. The fail-safe design ensures that when the inputs are open-circuited, the outputs are always high. Both devices are designed using the TI proprietary LinBiCMOS™ technology allowing low power consumption, high switching speeds, and robustness.

These devices offer optimum performance when used with the SN75LBC172 or SN75LBC174 quadruple line drivers. The SN65LBC175 is available in the 16-pin DIP (N), small-outline package (D), and the wide small-outline package (DW). The SN75LBC175 is available in the 16-pin DIP (N) and the small-outline package (D).

The SN65LBC175 is characterized over the industrial temperature range of −40°C to 85°C. The SN75LBC175 is characterized for operation over the commercial temperature range of 0°C to 70°C.

Documents

Technical documentation and resources

SN65LBC175, SN75LBC175 Quadruple Low-Power Differential Line Receivers datasheet (Rev. H)

Data sheet