SN65LBC175A-EP Series

Quadruple Low-Power Differential Line Receiver

Catalog

Quadruple Low-Power Differential Line Receiver

Part	Operating Temperature [Max]	Operating Temperature [Min]	Protocol	Voltage - Supply [Min]	Voltage - Supply [Max]	Package / Case	Package / Case [x]	Package / Case [y]	Supplier Device Package	Mounting Type	Data Rate	Receiver Hysteresis	Type	Number of Drivers/Receivers [custom]
Texas Instruments SN65LBC175ADR	85 °C	-40 °C	RS422 RS423 RS485	4.75 V	5.25 V	16-SOIC	0.154 in	3.9 mm	16-SOIC	Surface Mount	50 Mbps	40 mV	Receiver	4
Texas Instruments SN65LBC175D	85 °C	-40 °C	RS422 RS423 RS485	4.75 V	5.25 V	16-SOIC	0.154 in	3.9 mm	16-SOIC	Surface Mount	50 Mbps	40 mV	Receiver	4
Texas Instruments V62/17603-01XE	85 °C	-40 °C	RS422 RS485	4.75 V	5.25 V	16-SOIC	0.154 in	3.9 mm	16-SOIC	Surface Mount	50 Mbps	40 mV	Receiver	4
Texas Instruments SN65LBC175DRG4	85 °C	-40 °C	RS422 RS423 RS485	4.75 V	5.25 V	16-SOIC	0.154 in	3.9 mm	16-SOIC	Surface Mount		45 mV	Receiver	4
Texas Instruments SN65LBC175DW	85 °C	-40 °C	RS422 RS423 RS485	4.75 V	5.25 V	16-SOIC	0.295 in	7.5 mm	16-SOIC	Surface Mount	50 Mbps	40 mV	Receiver	4
Texas Instruments SN65LBC175ADG4	85 °C	-40 °C	RS422 RS423 RS485	4.75 V	5.25 V	16-SOIC	0.154 in	3.9 mm	16-SOIC	Surface Mount	50 Mbps	40 mV	Receiver	4
Texas Instruments SN65LBC175AD	85 °C	-40 °C	RS422 RS423 RS485	4.75 V	5.25 V	16-SOIC	0.154 in	3.9 mm	16-SOIC	Surface Mount	50 Mbps	40 mV	Receiver	4
Texas Instruments SN65LBC175DWG4	85 °C	-40 °C	RS422 RS423 RS485	4.75 V	5.25 V	16-SOIC	0.295 in	7.5 mm	16-SOIC	Surface Mount	50 Mbps	40 mV	Receiver	4
Texas Instruments SN65LBC175DR	85 °C	-40 °C	RS422 RS423 RS485	4.75 V	5.25 V	16-SOIC	0.154 in	3.9 mm	16-SOIC	Surface Mount		45 mV	Receiver	4
Texas Instruments SN65LBC175AMDREP	85 °C	-40 °C	RS422 RS423 RS485	4.75 V	5.25 V	16-SOIC	0.154 in	3.9 mm	16-SOIC	Surface Mount	50 Mbps	40 mV	Receiver	4

Catalog

Quadruple Low-Power Differential Line Receiver

Key Features

• Meets or exceeds the EIA standards RS-422-A, RS-423-A, RS-485, and CCITT recommendation V.11Designed to operate with pulse durations as short as 20 nsDesigned for multipoint transmission on long bus lines in noisy environmentsInput sensitivity: ±200 mVLow-power consumption: 20 mA maximumOpen-circuit fail-safe designCommon-mode input voltage range of −7 V to 12 VPin compatible with SN75175 and LTC489Meets or exceeds the EIA standards RS-422-A, RS-423-A, RS-485, and CCITT recommendation V.11Designed to operate with pulse durations as short as 20 nsDesigned for multipoint transmission on long bus lines in noisy environmentsInput sensitivity: ±200 mVLow-power consumption: 20 mA maximumOpen-circuit fail-safe designCommon-mode input voltage range of −7 V to 12 VPin compatible with SN75175 and LTC489

Description

The SN65LBC175 and SN75LBC175 are monolithic, quadruple, differential line receivers with 3-state outputs designed to meet the requirements of the EIA standards RS-422-A, RS-423-A, RS-485, and CCITT Recommendation V.11. The devices are optimized for balanced multipoint bus transmission at data rates up to and exceeding 10 million bits per second. The receivers are enabled in pairs, with an active-high enable input. Each differential receiver input features high impedance, hysteresis for increased noise immunity, and sensitivity of ±200 mV over a common-mode input voltage range of 12 V to −7 V. The fail-safe design ensures that when the inputs are open-circuited, the outputs are always high. Both devices are designed using the TI proprietary LinBiCMOS™ technology allowing low power consumption, high switching speeds, and robustness. These devices offer optimum performance when used with the SN75LBC172 or SN75LBC174 quadruple line drivers. The SN65LBC175 is available in the 16-pin DIP (N), small-outline package (D), and the wide small-outline package (DW). The SN75LBC175 is available in the 16-pin DIP (N) and the small-outline package (D). The SN65LBC175 is characterized over the industrial temperature range of −40°C to 85°C. The SN75LBC175 is characterized for operation over the commercial temperature range of 0°C to 70°C. The SN65LBC175 and SN75LBC175 are monolithic, quadruple, differential line receivers with 3-state outputs designed to meet the requirements of the EIA standards RS-422-A, RS-423-A, RS-485, and CCITT Recommendation V.11. The devices are optimized for balanced multipoint bus transmission at data rates up to and exceeding 10 million bits per second. The receivers are enabled in pairs, with an active-high enable input. Each differential receiver input features high impedance, hysteresis for increased noise immunity, and sensitivity of ±200 mV over a common-mode input voltage range of 12 V to −7 V. The fail-safe design ensures that when the inputs are open-circuited, the outputs are always high. Both devices are designed using the TI proprietary LinBiCMOS™ technology allowing low power consumption, high switching speeds, and robustness. These devices offer optimum performance when used with the SN75LBC172 or SN75LBC174 quadruple line drivers. The SN65LBC175 is available in the 16-pin DIP (N), small-outline package (D), and the wide small-outline package (DW). The SN75LBC175 is available in the 16-pin DIP (N) and the small-outline package (D). The SN65LBC175 is characterized over the industrial temperature range of −40°C to 85°C. The SN75LBC175 is characterized for operation over the commercial temperature range of 0°C to 70°C.