LD1086DTTR
ActiveLDO VOLTAGE REGULATOR, ADJUSTABLE, 30V IN, 1.3V DROP, 1.8V TO 12V/1.5A OUT, TO-252-3
Deep-Dive with AI
Search across all available documentation for this part.
LD1086DTTR
ActiveLDO VOLTAGE REGULATOR, ADJUSTABLE, 30V IN, 1.3V DROP, 1.8V TO 12V/1.5A OUT, TO-252-3
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | LD1086DTTR |
|---|---|
| Current - Output | 1.5 A |
| Current - Quiescent (Iq) | 10 mA |
| Mounting Type | Surface Mount |
| Number of Regulators | 1 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 C |
| Output Configuration | Positive |
| Output Type | Adjustable |
| Package / Case | TO-252-3, SC-63, DPAK (2 Leads + Tab) |
| Protection Features | Over Temperature, Over Current |
| PSRR | 88 dB |
| Supplier Device Package | DPAK |
| Voltage - Input (Max) [Max] | 30 V |
| Voltage - Output (Min/Fixed) | 1.25 V |
| Voltage Dropout (Max) | 1.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
Description
General part information
LD1086 Series
The LD1086 is a low drop voltage regulator capable of providing up to 1.5 A of output current. Dropout is guaranteed at a maximum of 1.2 V at the maximum output current, decreasing at lower loads. The LD1086 is pin-to-pin compatible with older 3-terminal adjustable regulators, but has better performance in terms of drop and output tolerance. Unlike PNP regulators, where a part of the output current is wasted as quiescent current, the LD1086 quiescent current flows into the load, increasing efficiency. Only a 10 μF (minimum) capacitor is needed for stability. The device is available in a TO-220, D²PAK, D²PAK/A, DPAK or DFN8 (4x4) package. On-chip trimming allows the regulator to reach a very tight output voltage tolerance; within ± 1% at 25 °C.
Documents
Technical documentation and resources
