Specification	DRV2604YZFT

Applications	Haptic Feedback
Function	Driver - Fully Integrated, Control and Power Stage
Interface	I2C
Motor Type - AC, DC	ERM, LRA
Mounting Type	Surface Mount
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Output Configuration	Differential
Package / Case	DSBGA, 9-UFBGA
Supplier Device Package	9-DSBGA
Technology	Power MOSFET
Voltage - Load [Max]	5.5 V
Voltage - Load [Min]	2.5 V
Voltage - Supply [Max]	5.5 V
Voltage - Supply [Min]	2.5 V

DRV2604L Series

Haptic driver for ERM/LRA with 2-V operation, waveform memory & auto-resonance tracking

Part	Function	Technology	Motor Type - AC, DC	Mounting Type	Supplier Device Package	Voltage - Load [Min]	Voltage - Load [Max]	Output Configuration	Voltage - Supply [Min]	Voltage - Supply [Max]	Package / Case	Applications	Interface	Operating Temperature [Max]	Operating Temperature [Min]	Contents	Type	Secondary Attributes	Utilized IC / Part	Supplied Contents	Embedded
Texas Instruments DRV2604YZFT	Driver - Fully Integrated Control and Power Stage	Power MOSFET	ERM LRA	Surface Mount	9-DSBGA	2.5 V	5.5 V	Differential	2.5 V	5.5 V	9-UFBGA DSBGA	Haptic Feedback	I2C	85 °C	-40 °C
Texas Instruments DRV2604LYZFR	Driver - Fully Integrated Control and Power Stage	Power MOSFET	ERM LRA	Surface Mount	9-DSBGA	2 V	5.5 V	Half Bridge (2)	2 V	5.5 V	9-UFBGA DSBGA	Haptic Feedback	I2C	85 °C	-40 °C
Texas Instruments DRV2604LYZFT	Driver - Fully Integrated Control and Power Stage	Power MOSFET	ERM LRA	Surface Mount	9-DSBGA	2 V	5.5 V	Half Bridge (2)	2 V	5.5 V	9-UFBGA DSBGA	Haptic Feedback	I2C	85 °C	-40 °C
Texas Instruments DRV2604LEVM-CT	Motor Controller/Driver Haptic/Vibration															Board(s) Cable(s)	Power Management	On-Board LEDs	DRV2604L	Board(s) Cable(s)	16-Bit MCU
Texas Instruments DRV2604EVM-CT	Motor Controller/Driver Haptic/Vibration																Power Management	On-Board LEDs	DRV2604	Board(s) Cable(s)	16-Bit MCU
Texas Instruments DRV2604LDGSEVM-M	Motor Controller/Driver Haptic/Vibration																Power Management		DRV2604L	Board(s)	16-Bit MCU
Texas Instruments DRV2604YZFR	Driver - Fully Integrated Control and Power Stage	Power MOSFET	ERM LRA	Surface Mount	9-DSBGA	2.5 V	5.5 V	Differential	2.5 V	5.5 V	9-UFBGA DSBGA	Haptic Feedback	I2C	85 °C	-40 °C

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Cut Tape (CT)	1	$ 2.45
		10	$ 2.20
		25	$ 2.07
		100	$ 1.77
	Digi-Reel®	1	$ 2.45
		10	$ 2.20
		25	$ 2.07
		100	$ 1.77
	Tape & Reel (TR)	250	$ 1.66
		500	$ 1.45
		1250	$ 1.20
		2500	$ 1.12
		6250	$ 1.08
Texas Instruments	SMALL T&R	1	$ 2.03
		100	$ 1.56
		250	$ 1.15
		1000	$ 0.82

Description

General part information

DRV2604L Series

The DRV2604L device is a low-voltage haptic driver that provides a closed-loop actuator-control system for high-quality tactile feedback for ERM and LRA. This schema helps improve actuator performance in terms of acceleration consistency, start time, and brake time and is accessible through a shared I2C compatible bus or PWM input signal.

The DRV2604L device includes enough integrated RAM to allow the user to pre-load over 100 customized smart-loop architecture waveforms. These waveforms can be instantly played back through I2C or optionally triggered through a hardware trigger terminal.

Additionally, the real-time playback mode allows the host processor to bypass the memory playback engine and play waveforms directly from the host through I2C.