TPS2117DRLR
Active1.6-V TO 5.5-V, 20-MΩ, 4-A LOW IQ POWER MULTIPLEXER WITH MANUAL AND PRIORITY SWITCHOVER
Deep-Dive with AI
Search across all available documentation for this part.
TPS2117DRLR
Active1.6-V TO 5.5-V, 20-MΩ, 4-A LOW IQ POWER MULTIPLEXER WITH MANUAL AND PRIORITY SWITCHOVER
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | TPS2117DRLR |
|---|---|
| Current - Output (Max) [Max] | 4 A |
| Fault Protection | Current Limiting (Fixed), Reverse Current |
| Input Type | Differential |
| Interface | Logic |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | High Side |
| Output Type | N-Channel |
| Package / Case | SOT-583 |
| Ratio - Input:Output | 2:1 |
| Rds On (Typ) | 20 mOhm |
| Supplier Device Package | SOT-583 |
| Switch Type | General Purpose |
| Voltage - Load [Max] | 5.5 V |
| Voltage - Load [Min] | 1.6 V |
| Voltage - Supply (Vcc/Vdd) [Max] | 5.5 V |
| Voltage - Supply (Vcc/Vdd) [Min] | 1.6 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.35 | |
| 10 | $ 1.20 | |||
| 25 | $ 1.14 | |||
| 100 | $ 0.94 | |||
| 250 | $ 0.88 | |||
| 500 | $ 0.78 | |||
| 1000 | $ 0.61 | |||
| Digi-Reel® | 1 | $ 1.35 | ||
| 10 | $ 1.20 | |||
| 25 | $ 1.14 | |||
| 100 | $ 0.94 | |||
| 250 | $ 0.88 | |||
| 500 | $ 0.78 | |||
| 1000 | $ 0.61 | |||
| Tape & Reel (TR) | 4000 | $ 0.57 | ||
| 8000 | $ 0.54 | |||
| 12000 | $ 0.52 | |||
| Texas Instruments | LARGE T&R | 1 | $ 1.00 | |
| 100 | $ 0.77 | |||
| 250 | $ 0.56 | |||
| 1000 | $ 0.40 | |||
Description
General part information
TPS2117 Series
The TPS2117 is a power mux device with a voltage rating of 1.6 V to 5.5 V and a maximum current rating of 4 A. The device uses N-channel MOSFETs to switch between supplies while providing a controlled slew rate when voltage is first applied.
Due to its low quiescent of 1.32 µA (typical) and low standby current of 50 nA (typical), the TPS2117 is ideal for systems where a battery is connected to one of the inputs. These low currents extend the life and operation of the battery when in use.
The TPS2117 can be configured for two different switchover behaviors depending on the application. Automatic priority mode prioritizes the supply connected to VIN1 and switches over to the secondary supply (VIN2) when VIN1 drops. Manual mode allows the user to toggle a GPIO or enable signal to switch between channels.
Documents
Technical documentation and resources