TS3USB3000MRSER
ActiveDPDT USB 2.0 HIGH-SPEED AND MOBILE HIGH-DEFINITION LINK (MHL) (6.1GHZ) SWITCH
Deep-Dive with AI
Search across all available documentation for this part.
TS3USB3000MRSER
ActiveDPDT USB 2.0 HIGH-SPEED AND MOBILE HIGH-DEFINITION LINK (MHL) (6.1GHZ) SWITCH
Technical Specifications
Parameters and characteristics for this part
| Specification | TS3USB3000MRSER |
|---|---|
| -3db Bandwidth | 6.1 GHz |
| Applications | USB |
| Features | USB 2.0, Bi-Directional |
| Mounting Type | Surface Mount |
| Number of Channels | 1 |
| On-State Resistance (Max) [Max] | 9 Ohm |
| Operating Temperature [Max] | 85 C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 10-UFQFN |
| Supplier Device Package | 10-UQFN |
| Supplier Device Package [x] | 2 |
| Supplier Device Package [y] | 1.5 |
| Switch Circuit | DPDT |
| Voltage - Supply, Single (V+) [Max] | 4.3 V |
| Voltage - Supply, Single (V+) [Min] | 2.7 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.40 | |
| 10 | $ 0.88 | |||
| 25 | $ 0.74 | |||
| 100 | $ 0.59 | |||
| 250 | $ 0.51 | |||
| 500 | $ 0.47 | |||
| 1000 | $ 0.43 | |||
| Digi-ReelÛ | 1 | $ 1.40 | ||
| 10 | $ 0.88 | |||
| 25 | $ 0.74 | |||
| 100 | $ 0.59 | |||
| 250 | $ 0.51 | |||
| 500 | $ 0.47 | |||
| 1000 | $ 0.43 | |||
| Tape & Reel (TR) | 3000 | $ 0.36 | ||
| 6000 | $ 0.33 | |||
| 15000 | $ 0.32 | |||
| 30000 | $ 0.31 | |||
| Texas Instruments | LARGE T&R | 1 | $ 0.60 | |
| 100 | $ 0.46 | |||
| 250 | $ 0.34 | |||
| 1000 | $ 0.24 | |||
Description
General part information
TS3USB3000 Series
The TS3USB3000 device is a double-pole, double throw (DPDT) multiplexer that includes a high-speed Mobile High-Definition Link (MHL) switch and an USB 2.0 High-Speed (480 Mbps) switch in the same package. These configurations allow the system designer to use a common USB or Micro-USB connector for both MHL video signals and USB data.
The TS3USB3000 has a VCCrange of 2.3 V to 4.8 V and supports overvoltage tolerance (OVT) feature, which allows the I/O pins to withstand overvoltage conditions (up to 5.5 V). The power-off protection feature forces all I/O pins to be in high-impedance mode when power is not present, allowing full isolation of the signal lines under such condition without excessive leakage current. The select pins of TS3USB3000 are compatible with 1.8-V control voltage, allowing them to be directly interfaced with the General-Purpose I/O (GPIO) from a mobile processor.
The TS3USB3000 comes with a small 10-pin UQFN package with only 1.5 mm × 2 mm in size, which makes it a perfect candidate to be used in mobile applications.
Documents
Technical documentation and resources
