TS3USB3000 Series

DPDT USB 2.0 High-Speed and Mobile High-Definition Link (MHL) (6.1GHz) Switch

Catalog

DPDT USB 2.0 High-Speed and Mobile High-Definition Link (MHL) (6.1GHz) Switch

Part	On-State Resistance (Max) [Max]	Applications	Mounting Type	Package / Case	Voltage - Supply, Single (V+) [Max]	Voltage - Supply, Single (V+) [Min]	Switch Circuit	Supplier Device Package [x]	Supplier Device Package [y]	Supplier Device Package	Operating Temperature [Max]	Operating Temperature [Min]	-3db Bandwidth	Features	Number of Channels
Texas Instruments TS3USB3000MRSER	9 Ohm	USB	Surface Mount	10-UFQFN	4.3 V	2.7 V	DPDT	2	1.5	10-UQFN	85 C	-40 °C	6.1 GHz	Bi-Directional USB 2.0	1
Texas Instruments TS3USB3000RSER	9 Ohm	USB	Surface Mount	10-UFQFN	4.3 V	2.7 V	DPDT	2	1.5	10-UQFN	85 °C	-40 °C	6.1 GHz	Bi-Directional USB 2.0	1

Catalog

DPDT USB 2.0 High-Speed and Mobile High-Definition Link (MHL) (6.1GHz) Switch

Key Features

• VCCRange 2.3 V to 4.8 VMobile Hi-Definition Link (MHL) Switch:Bandwidth (–3 dB): 6.1 GHzRON(Typical): 5.7 ΩCON(Typical): 1.6 pFUSB Switch:Bandwidth (–3 dB): 6.1 GHzRON(Typical): 4.6 ΩCON(Typical): 1.4 pFCurrent Consumption: 30 µA (Typical)Special Features:IOFFProtection Prevents Current Leakage in Powered-Down State (VCCand VBUS= 0 V)1.8-V Compatible Control Inputs (SEL,OE)Overvoltage Tolerance (OVT) on all I/O Pins up to 5.5 V Without External ComponentsOvervoltage Protection When 9-V Short toD+/-PinESD Performance:3.5-kV Human Body Model (A114B, Class II)1-kV Charged-Device Model (C101)10-Pin UQFN Package(1.5-mm × 2-mm, 0.5-mm Pitch)VCCRange 2.3 V to 4.8 VMobile Hi-Definition Link (MHL) Switch:Bandwidth (–3 dB): 6.1 GHzRON(Typical): 5.7 ΩCON(Typical): 1.6 pFUSB Switch:Bandwidth (–3 dB): 6.1 GHzRON(Typical): 4.6 ΩCON(Typical): 1.4 pFCurrent Consumption: 30 µA (Typical)Special Features:IOFFProtection Prevents Current Leakage in Powered-Down State (VCCand VBUS= 0 V)1.8-V Compatible Control Inputs (SEL,OE)Overvoltage Tolerance (OVT) on all I/O Pins up to 5.5 V Without External ComponentsOvervoltage Protection When 9-V Short toD+/-PinESD Performance:3.5-kV Human Body Model (A114B, Class II)1-kV Charged-Device Model (C101)10-Pin UQFN Package(1.5-mm × 2-mm, 0.5-mm Pitch)

Description

The TS3USB3000 device is a double-pole, double throw (DPDT) multiplexer that includes a high-speed Mobile High-Definition Link (MHL) switch and an USB 2.0 High-Speed (480 Mbps) switch in the same package. These configurations allow the system designer to use a common USB or Micro-USB connector for both MHL video signals and USB data. The TS3USB3000 has a VCCrange of 2.3 V to 4.8 V and supports overvoltage tolerance (OVT) feature, which allows the I/O pins to withstand overvoltage conditions (up to 5.5 V). The power-off protection feature forces all I/O pins to be in high-impedance mode when power is not present, allowing full isolation of the signal lines under such condition without excessive leakage current. The select pins of TS3USB3000 are compatible with 1.8-V control voltage, allowing them to be directly interfaced with the General-Purpose I/O (GPIO) from a mobile processor. The TS3USB3000 comes with a small 10-pin UQFN package with only 1.5 mm × 2 mm in size, which makes it a perfect candidate to be used in mobile applications. The TS3USB3000 device is a double-pole, double throw (DPDT) multiplexer that includes a high-speed Mobile High-Definition Link (MHL) switch and an USB 2.0 High-Speed (480 Mbps) switch in the same package. These configurations allow the system designer to use a common USB or Micro-USB connector for both MHL video signals and USB data. The TS3USB3000 has a VCCrange of 2.3 V to 4.8 V and supports overvoltage tolerance (OVT) feature, which allows the I/O pins to withstand overvoltage conditions (up to 5.5 V). The power-off protection feature forces all I/O pins to be in high-impedance mode when power is not present, allowing full isolation of the signal lines under such condition without excessive leakage current. The select pins of TS3USB3000 are compatible with 1.8-V control voltage, allowing them to be directly interfaced with the General-Purpose I/O (GPIO) from a mobile processor. The TS3USB3000 comes with a small 10-pin UQFN package with only 1.5 mm × 2 mm in size, which makes it a perfect candidate to be used in mobile applications.