Deep-Dive with AI
Search across all available documentation for this part.
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | 125825-HMC713LP3E |
|---|---|
| Contents | Board(s) |
| For Use With/Related Products | HMC713LP3E |
| Frequency [Max] | 8 GHz |
| Frequency [Min] | 50 MHz |
| Supplied Contents | Board(s) |
| Type | Log Detector/Controller |
| Utilized IC / Part | HMC713LP3E |
HMC713LP3E Series
54 dB, Logarithmic Detector/Controller SMT, 45 - 2700 MHz
| Part | Current - Supply | Frequency [Max] | Frequency [Min] | Package / Case | Package / Case [custom] | Package / Case | Supplier Device Package | RF Type | Mounting Type | Voltage - Supply [Min] | Voltage - Supply [Max] | Accuracy | Supplied Contents | For Use With/Related Products | Utilized IC / Part | Contents | Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 Analog Devices | 17 mA | 2.7 GHz | 45 MHz | 8-MSOP 8-TSSOP | 0.118 in | 3 mm | 8-MSOP | General Purpose | Surface Mount | 2.7 V | 5.5 V | 1 dB | |||||
 Analog Devices | 17 mA | 8 GHz | 50 MHz | 16-VFQFN Exposed Pad | 16-QFN (3x3) | LTE WiMax | Surface Mount | 2.7 V | 5.5 V | 1 dB | |||||||
Analog Devices | 8 GHz | 50 MHz | Board(s) | HMC713LP3E | HMC713LP3E | Board(s) | Log Detector/Controller | ||||||||||
Analog Devices | 17 mA | 2.7 GHz | 45 MHz | 8-MSOP 8-TSSOP | 0.118 in | 3 mm | 8-MSOP | General Purpose | Surface Mount | 2.7 V | 5.5 V | 1 dB |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
Description
General part information
HMC713LP3E Series
The HMC713LP3E Logarithmic Detector/Controller is ideal for converting the power of RF signals with frequencies in the 50 MHz to 8000 MHz range, to a DC voltage, proportional to input power, at its output. The HMC713LP3E employs a successive compression technology which delivers 54 dB of dynamic range with high measurement accuracy over a wide input frequency range. As the input signal is increased, successive amplifiers move into saturation one by one creating an accurate approximation of the logarithm function. The outputs of a series of detectors are summed, converted into voltage domain and buffered to drive the OUTP output.For detection mode, the OUTP pin is connected to the VSET input and will provide a nominal logarithmic slope of 17 mV/dB and an intercept of -68 dBm. The HMC713LP3E can also be used in the controller mode where an external voltage is applied to the VSET pin to create an AGC or APC feedback loop.ApplicationsCellular InfrastructureWiMAX, WiBro & LTE/4GPower Monitoring & Control CircuitryReceiver Signal Strength Indication (RSSI)Cellular InfrastructureAutomatic Gain & Power ControlMilitary, ECM & Radar
Documents
Technical documentation and resources