Specification	ISO1042BDWVR

Data Rate	5 MBd
Duplex	Full
Mounting Type	Surface Mount
Operating Temperature [Max]	125 °C
Operating Temperature [Min]	-40 °C
Package / Case	8-SOIC
Package / Case [custom]	0.295 in
Package / Case [custom]	7.5 mm
Protocol	CANbus
Receiver Hysteresis	120 mV
Supplier Device Package	8-SOIC
Type	Transceiver
Voltage - Supply [Max]	1.89 V, 5.5 V
Voltage - Supply [Min]	2.25 V, 1.71 V

ISO1042-Q1 Series

Automotive, isolated CAN transceiver with 70-V bus fault protection & flexible data rate

Part	Data Rate	Mounting Type	Voltage - Supply [Max]	Voltage - Supply [Min]	Duplex	Package / Case	Package / Case [custom]	Package / Case [custom]	Operating Temperature [Min]	Operating Temperature [Max]	Grade	Supplier Device Package	Protocol	Qualification	Receiver Hysteresis	Type	Supplied Contents	Contents	Function	Utilized IC / Part	Package / Case [x]	Package / Case [y]
Texas Instruments ISO1042QDWVRQ1	5 MBd	Surface Mount	1.89 V 5.5 V	1.71 V	Full	8-SOIC	0.295 in	7.5 mm	-40 °C	125 °C	Automotive	8-SOIC	CANbus	AEC-Q100	125 mV	Transceiver Isolated
Texas Instruments ISO1042DWVEVM																Interface	Board(s)	Board(s)	CANbus	ISO1042
Texas Instruments ISO1042DWEVM																Interface	Board(s)			ISO1042
Texas Instruments ISO1042BQDWVRQ1	5 MBd	Surface Mount	1.89 V 5.5 V	1.71 V	Full	8-SOIC	0.295 in	7.5 mm	-40 °C	125 °C	Automotive	8-SOIC	CANbus	AEC-Q100	125 mV	Transceiver Isolated
Texas Instruments ISO1042BDWVR	5 MBd	Surface Mount	1.89 V 5.5 V	1.71 V 2.25 V	Full	8-SOIC	0.295 in	7.5 mm	-40 °C	125 °C		8-SOIC	CANbus		120 mV	Transceiver
Texas Instruments ISO1042QDWRQ1	5 MBd	Surface Mount	1.89 V 5.5 V	1.71 V 2.25 V	Full	16-SOIC			-40 °C	125 °C	Automotive	16-SOIC	CANbus	AEC-Q100	120 mV	Transceiver					0.295 in	7.5 mm
Texas Instruments ISO1042BQDWVQ1	5 MBd	Surface Mount	5.5 V	1.71 V 4.5 V		8-SOIC	0.295 in	7.5 mm	-40 °C	125 °C	Automotive	8-SOIC	CANbus	AEC-Q100	120 mV	Transceiver
Texas Instruments ISO1042QDWQ1	5 MBd	Surface Mount	1.89 V 5.5 V	1.71 V 2.25 V	Full	16-SOIC			-40 °C	125 °C	Automotive	16-SOIC	CANbus	AEC-Q100	120 mV	Transceiver					0.295 in	7.5 mm
Texas Instruments ISO1042DW	5 MBd	Surface Mount	1.89 V 5.5 V	1.71 V 2.25 V	Full	16-SOIC			-40 °C	125 °C		16-SOIC	CANbus		120 mV	Transceiver					0.295 in	7.5 mm
Texas Instruments ISO1042DWVR	5 MBd	Surface Mount	1.89 V 5.5 V	1.71 V 2.25 V	Full	8-SOIC	0.295 in	7.5 mm	-40 °C	125 °C		8-SOIC	CANbus		120 mV	Transceiver

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Cut Tape (CT)	1	$ 3.45
		10	$ 3.10
		25	$ 2.93
		100	$ 2.54
		250	$ 2.41
		500	$ 2.16
	Digi-Reel®	1	$ 3.45
		10	$ 3.10
		25	$ 2.93
		100	$ 2.54
		250	$ 2.41
		500	$ 2.16
	Tape & Reel (TR)	1000	$ 1.82
		2000	$ 1.73
		5000	$ 1.67
Texas Instruments	LARGE T&R	1	$ 2.61
		100	$ 2.28
		250	$ 1.60
		1000	$ 1.29

Description

General part information

ISO1042-Q1 Series

The ISO1042-Q1 device is a galvanically-isolated controller area network (CAN) transceiver that meets the specifications of the ISO11898-2 (2016) standard. The ISO1042-Q1 device offers ±70-V DC bus fault protection and ±30-V common-mode voltage range. The device supports up to 5-Mbps data rate in CAN FD mode allowing much faster transfer of payload compared to classic CAN. This device uses a silicon dioxide (SiO2) insulation barrier with a withstand voltage of 5000 VRMSand a working voltage of 1060 VRMS. Electromagnetic compatibility has been significantly enhanced to enable system-level ESD, EFT, surge, and emissions compliance. Used in conjunction with isolated power supplies, the device protects against high voltage, and prevents noise currents from the bus from entering the local ground. The ISO1042-Q1 device is available for both basic and reinforced isolation (seeReinforced and Basic Isolation Options). The ISO1042-Q1 device supports a wide ambient temperature range of –40°C to +125°C. The device is available in the SOIC-16 (DW) package and a smaller SOIC-8 (DWV) package.