SN74ACT1284DBR
Active7-BIT BUS INTERFACES WITH 3-STATE OUTPUTS
Deep-Dive with AI
Search across all available documentation for this part.
SN74ACT1284DBR
Active7-BIT BUS INTERFACES WITH 3-STATE OUTPUTS
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | SN74ACT1284DBR |
|---|---|
| Logic Type | IEEE STD 1284 Translation Transceiver |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 70 °C |
| Operating Temperature [Min] | 0 °C |
| Package / Case | 20-SSOP |
| Supplier Device Package | 20-SSOP |
| Supply Voltage [Max] | 5.5 V |
| Supply Voltage [Min] | 4.5 V |
SN74ACT1284 Series
7-Bit Bus Interfaces With 3-State Outputs
| Part | Logic Type | Supplier Device Package | Package / Case | Package / Case [y] | Package / Case [y] | Operating Temperature [Max] | Operating Temperature [Min] | Mounting Type | Supply Voltage [Min] | Supply Voltage [Max] | Package / Case [x] | Package / Case | Package / Case |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 Texas Instruments | IEEE STD 1284 Translation Transceiver | 20-SOIC | 20-SOIC | 0.295 in | 7.5 mm | 70 °C | 0 °C | Surface Mount | 4.5 V | 5.5 V | |||
 Texas Instruments | IEEE STD 1284 Translation Transceiver | 20-TSSOP | 20-TSSOP | 4.4 mm | 70 °C | 0 °C | Surface Mount | 4.5 V | 5.5 V | 0.173 in | |||
Texas Instruments | IEEE STD 1284 Translation Transceiver | 20-TSSOP | 20-TSSOP | 4.4 mm | 70 °C | 0 °C | Surface Mount | 4.5 V | 5.5 V | 0.173 in | |||
Texas Instruments | IEEE STD 1284 Translation Transceiver | 20-SSOP | 20-SSOP | 70 °C | 0 °C | Surface Mount | 4.5 V | 5.5 V | |||||
Texas Instruments | IEEE STD 1284 Translation Transceiver | 20-TSSOP | 20-TSSOP | 4.4 mm | 70 °C | 0 °C | Surface Mount | 4.5 V | 5.5 V | 0.173 in | |||
 Texas Instruments | IEEE STD 1284 Translation Transceiver | 20-SO | 20-SOIC | 70 °C | 0 °C | Surface Mount | 4.5 V | 5.5 V | 0.209 " | 5.3 mm | |||
Texas Instruments | IEEE STD 1284 Translation Transceiver | 20-TSSOP | 20-TSSOP | 4.4 mm | 70 °C | 0 °C | Surface Mount | 4.5 V | 5.5 V | 0.173 in |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.50 | |
| Digi-Reel® | 1 | $ 1.50 | ||
| Tape & Reel (TR) | 2000 | $ 0.64 | ||
| 6000 | $ 0.61 | |||
| 10000 | $ 0.58 | |||
| Texas Instruments | LARGE T&R | 1 | $ 1.28 | |
| 100 | $ 0.99 | |||
| 250 | $ 0.73 | |||
| 1000 | $ 0.52 | |||
Description
General part information
SN74ACT1284 Series
The ’ACT1284 devices are designed for asynchronous two-way communication between data buses. The control function minimizes external timing requirements.
The devices allow data transmission in either the A-to-B or the B-to-A direction for bits 1, 2, 3, and 4, depending on the logic level at the direction-control (DIR) input. Bits 5, 6, and 7, however, always transmit in the A-to-B direction.
The output drive for each mode is determined by the high-drive (HD) control pin. When HD is high, the high drive is delivered by the totem-pole configuration, and when HD is low, the outputs are open drain. This meets the drive requirements as specified in the IEEE 1284-I (level-1 type) and the IEEE 1284-II (level-2 type) parallel peripheral-interface specification.
Documents
Technical documentation and resources