SN74ALVCH16827DGGR
Active20-CH, 1.65-V TO 3.6-V BUFFERS WITH BUS-HOLD AND 3-STATE OUTPUTS
Deep-Dive with AI
Search across all available documentation for this part.
SN74ALVCH16827DGGR
Active20-CH, 1.65-V TO 3.6-V BUFFERS WITH BUS-HOLD AND 3-STATE OUTPUTS
Technical Specifications
Parameters and characteristics for this part
| Specification | SN74ALVCH16827DGGR |
|---|---|
| Current - Output High, Low [custom] | 24 mA |
| Current - Output High, Low [custom] | 24 mA |
| Logic Type | Buffer, Non-Inverting |
| Mounting Type | Surface Mount |
| Number of Bits per Element [custom] | 10 |
| Number of Elements | 2 |
| Operating Temperature [Max] | 85 C |
| Operating Temperature [Min] | -40 ¯C |
| Output Type | 3-State |
| Package / Case | 56-TFSOP |
| Package / Case [x] | 0.24 in |
| Package / Case [y] | 6.1 mm |
| Supplier Device Package | 56-TSSOP |
| Voltage - Supply [Max] | 3.6 V |
| Voltage - Supply [Min] | 1.65 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 3.84 | |
| 10 | $ 2.53 | |||
| 25 | $ 2.18 | |||
| 100 | $ 1.80 | |||
| 250 | $ 1.61 | |||
| 500 | $ 1.50 | |||
| 1000 | $ 1.40 | |||
| Digi-Reel® | 1 | $ 3.84 | ||
| 10 | $ 2.53 | |||
| 25 | $ 2.18 | |||
| 100 | $ 1.80 | |||
| 250 | $ 1.61 | |||
| 500 | $ 1.50 | |||
| 1000 | $ 1.40 | |||
| N/A | 1269 | $ 2.90 | ||
| 3398 | $ 2.90 | |||
| Tape & Reel (TR) | 2000 | $ 1.32 | ||
| 4000 | $ 1.26 | |||
| 6000 | $ 1.22 | |||
| Texas Instruments | LARGE T&R | 1 | $ 2.17 | |
| 100 | $ 1.79 | |||
| 250 | $ 1.29 | |||
| 1000 | $ 0.97 | |||
Description
General part information
74ALVCH16827 Series
This 20-bit noninverting buffer/driver is designed for 1.65-V to 3.6-V VCCoperation.
The SN74ALVCH16827 is composed of two 10-bit sections with separate output-enable signals. For either 10-bit buffer section, the two output-enable (1OE1\ and 1OE2\ or 2OE1\ and 2OE2\) inputs must both be low for the corresponding Y outputs to be active. If either output-enable input is high, the outputs of that 10-bit buffer section are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Documents
Technical documentation and resources
