Specification	TPS71025P

Control Features	Power Good, Enable
Current - Output	500 mA
Current - Quiescent (Iq)	390 µA
Current - Supply (Max) [Max]	540 µA
Mounting Type	Through Hole
Number of Regulators	1
Operating Temperature [Max]	125 °C
Operating Temperature [Min]	0 °C
Output Configuration	Positive
Package / Case	8-DIP (0.300", 7.62mm)
Protection Features	Over Temperature
PSRR [Max]	59 dB
PSRR [Min]	54 dB
Supplier Device Package	8-PDIP
Voltage - Input (Max) [Max]	10 V
Voltage - Output (Min/Fixed)	2.5 V
Voltage Dropout (Max)	0.4 V

TPS71025 Series

Part	Voltage - Output (Min/Fixed)	Number of Regulators	Voltage Dropout (Max)	Current - Output	Output Configuration	Current - Quiescent (Iq)	Package / Case	Package / Case [y]	Package / Case [x]	PSRR [Max]	PSRR [Min]	Protection Features	Current - Supply (Max) [Max]	Control Features	Voltage - Input (Max) [Max]	Supplier Device Package	Operating Temperature [Max]	Mounting Type	Package / Case	Package / Case
Texas Instruments TPS71025PWR	2.5 V	1	0.4 V	500 mA	Positive	390 µA	20-TSSOP	4.4 mm	0.173 "	59 dB	54 dB	Over Temperature	540 µA	Enable Power Good	10 V	20-TSSOP	125 °C	Surface Mount
Texas Instruments TPS71025D	2.5 V	1	0.4 V	500 mA	Positive	390 µA	8-SOIC			59 dB	54 dB	Over Temperature	540 µA	Enable Power Good	10 V	8-SOIC	125 °C	Surface Mount	0.154 in	3.9 mm
Texas Instruments TPS71025DR	2.5 V	1	0.4 V	500 mA	Positive	390 µA	8-SOIC			59 dB	54 dB	Over Temperature	540 µA	Enable Power Good	10 V	8-SOIC	125 °C	Surface Mount	0.154 in	3.9 mm
Texas Instruments TPS71025P	2.5 V	1	0.4 V	500 mA	Positive	390 µA	8-DIP (0.300" 7.62mm)			59 dB	54 dB	Over Temperature	540 µA	Enable Power Good	10 V	8-PDIP	125 °C	Through Hole

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	N/A	0	$ 2.69
		2717	$ 2.69
Texas Instruments	TUBE	1	$ 3.23
		100	$ 2.83
		250	$ 1.99
		1000	$ 1.60

Description

General part information

TPS71025 Series

The TPS71025 low-dropout regulator offers an order of magnitude reduction in both dropout voltage and quiescent current over conventional LDO performance. The improvement results from replacing the typical pnp pass transistor with a PMOS device.

Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (maximum of 95mV at an output current of 100 mA) and is directly proportional to the output current (see Figure 1). Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and remains independent of output loading (typically 292 uA over the full range of output current, 0 mA to 500mA). These two key specifications yield a significant improvement in operating life for battery-powered systems. The TPS71025 also features a sleep mode; applying a TTL high signal to EN\ (enable\) shuts down the regulator, reducing the quiescent current to 0.5 uA maximum at TJ= 25°C.

The D package is availabe taped and reeled. Add R suffix to device type (e.g., TPS71025DR). The PW package is only available left-end taped and reeled and is indicated by the LE suffix on the device type.

Documents

Technical documentation and resources

TPS71025 - Low-Dropout Voltage Regulator datasheet (Rev. A)

Data sheet