
TPS71025D
Active500-MA, 10-V, HIGH-PSRR, LOW-DROPOUT VOLTAGE REGULATOR WITH ENABLE
Deep-Dive with AI
Search across all available documentation for this part.

TPS71025D
Active500-MA, 10-V, HIGH-PSRR, LOW-DROPOUT VOLTAGE REGULATOR WITH ENABLE
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | TPS71025D |
|---|---|
| Control Features | Enable, Power Good |
| Current - Output | 500 mA |
| Current - Quiescent (Iq) | 390 µA |
| Current - Supply (Max) [Max] | 540 µA |
| Mounting Type | Surface Mount |
| Number of Regulators | 1 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | 0 °C |
| Output Configuration | Positive |
| Output Type | 1.81 mOhm |
| Package / Case | 8-SOIC |
| Package / Case [x] | 0.154 in |
| Package / Case [y] | 3.9 mm |
| Protection Features | Over Temperature |
| PSRR [Max] | 59 dB |
| PSRR [Min] | 54 dB |
| Supplier Device Package | 8-SOIC |
| Voltage - Input (Max) [Max] | 10 V |
| Voltage - Output (Min/Fixed) | 2.5 V |
| Voltage Dropout (Max) [Max] | 0.4 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tube | 300 | $ 3.21 | |
| Texas Instruments | TUBE | 1 | $ 3.85 | |
| 100 | $ 3.38 | |||
| 250 | $ 2.37 | |||
| 1000 | $ 1.91 | |||
Description
General part information
TPS71025 Series
The TPS71025 low-dropout regulator offers an order of magnitude reduction in both dropout voltage and quiescent current over conventional LDO performance. The improvement results from replacing the typical pnp pass transistor with a PMOS device.
Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (maximum of 95mV at an output current of 100 mA) and is directly proportional to the output current (see Figure 1). Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and remains independent of output loading (typically 292 uA over the full range of output current, 0 mA to 500mA). These two key specifications yield a significant improvement in operating life for battery-powered systems. The TPS71025 also features a sleep mode; applying a TTL high signal to EN\ (enable\) shuts down the regulator, reducing the quiescent current to 0.5 uA maximum at TJ= 25°C.
The D package is availabe taped and reeled. Add R suffix to device type (e.g., TPS71025DR). The PW package is only available left-end taped and reeled and is indicated by the LE suffix on the device type.
Documents
Technical documentation and resources