Integrated Circuits (ICs)

THS3111IDGN

Active

SINGLE, LOW NOISE, HIGH VOLTAGE CURRENT-FEEDBACK AMPLIFIER

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsNoise Analysis for High Speed Op Amps (Rev. A)Wideband Complementary Current Output DAC Single-Ended Interface (Rev. A)+3

Integrated Circuits (ICs)

THS3111IDGN

Active

Texas Instruments

SINGLE, LOW NOISE, HIGH VOLTAGE CURRENT-FEEDBACK AMPLIFIER

Deep-Dive with AI

DocumentsNoise Analysis for High Speed Op Amps (Rev. A)Wideband Complementary Current Output DAC Single-Ended Interface (Rev. A)+3

Specifications Series Pricing Description Documents

Technical Specifications

Parameters and characteristics for this part

Specification	THS3111IDGN

-3db Bandwidth	100 MHz
Amplifier Type	Current Feedback
Current - Input Bias	1.5 µA
Current - Output / Channel [custom]	260 mA
Current - Supply	4.8 mA
Mounting Type	Surface Mount
Number of Circuits	1
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Package / Case	Exposed Pad, 8-TSSOP, 8-MSOP
Package / Case [custom]	0.118 in, 3 mm
Slew Rate	1300 V/µs
Supplier Device Package	8-HVSSOP
Voltage - Input Offset	3 mV
Voltage - Supply Span (Max) [Max]	30 V
Voltage - Supply Span (Min) [Min]	10 V

THS3111 Series

Part	Operating Temperature [Max]	Operating Temperature [Min]	Package / Case	Package / Case [custom]	Number of Circuits	Amplifier Type	Voltage - Supply Span (Max) [Max]	Current - Output / Channel [custom]	Supplier Device Package	Slew Rate	Mounting Type	Voltage - Input Offset	Current - Supply	Voltage - Supply Span (Min) [Min]	Current - Input Bias	-3db Bandwidth	Package / Case [y]	Package / Case [x]	Channels per IC	Voltage - Supply, Single/Dual (±) [Min]	Voltage - Supply, Single/Dual (±) [Max]	Output Type	Board Type	Utilized IC / Part	Current - Supply (Main IC)	Supplied Contents
Texas Instruments THS3111IDGN	85 °C	-40 °C	8-MSOP 8-TSSOP Exposed Pad	0.118 in 3 mm	1	Current Feedback	30 V	260 mA	8-HVSSOP	1300 V/µs	Surface Mount	3 mV	4.8 mA	10 V	1.5 µA	100 MHz
Texas Instruments THS3111IDR	85 °C	-40 °C	8-SOIC		1	Current Feedback	30 V	260 mA	8-SOIC	1300 V/µs	Surface Mount	3 mV	4.8 mA	10 V	1.5 µA	100 MHz	3.9 mm	0.154 in
Texas Instruments THS3111CD	70 °C	0 °C	8-SOIC		1	Current Feedback	30 V	260 mA	8-SOIC	1300 V/µs	Surface Mount	3 mV	4.8 mA	10 V	1.5 µA	100 MHz	3.9 mm	0.154 in
Texas Instruments THS3111IDG4	85 °C	-40 °C	8-SOIC		1	Current Feedback	30 V	260 mA	8-SOIC	1300 V/µs	Surface Mount	3 mV	4.8 mA	10 V	1.5 µA	100 MHz	3.9 mm	0.154 in
Texas Instruments THS3111EVM						Current Feedback		260 mA		1300 V/µs						100 MHz			1 - Single	-5 V 10 V	15 V 30 V	Single-Ended	Fully Populated	THS3111	4.8 mA	Board(s)
Texas Instruments THS3111ID	85 °C	-40 °C	8-SOIC		1	Current Feedback	30 V	260 mA	8-SOIC	1300 V/µs	Surface Mount	3 mV	4.8 mA	10 V	1.5 µA	100 MHz	3.9 mm	0.154 in

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Tube	1	$ 8.00
		10	$ 5.49
		25	$ 4.84
		100	$ 4.11
		250	$ 3.75
		500	$ 3.54
		1000	$ 3.36
		2500	$ 3.21
Texas Instruments	TUBE	1	$ 5.54
		100	$ 4.51
		250	$ 3.55
		1000	$ 3.01

Description

General part information

THS3111 Series

The THS3110 and THS3111 are low-noise, high-voltage, current-feedback amplifiers designed to operate over a wide supply range of ±5 V to ±15 V for today's high performance applications.

The THS3110 features a power-down pin (PD) that puts the amplifier in low-power standby mode, and lowers the quiescent current from 4.8 mA to 270 µA.

These amplifiers provide well-regulated ac performance characteristics. The unity-gain bandwidth of 100 MHz allows for good distortion characteristics below 10 MHz. Coupled with a high 1300-V/&mirco;s slew rate, the THS3110 and THS3111 amplifiers allow for high output voltage swings at high frequencies.

Documents

Technical documentation and resources

THS3111IDGN

Deep-Dive with AI

THS3111IDGN

Deep-Dive with AI

Technical Specifications

THS3111 Series

Pricing

Description

THS3111 Series

Documents

Noise Analysis for High Speed Op Amps (Rev. A)

Wideband Complementary Current Output DAC Single-Ended Interface (Rev. A)

Active filters using current-feedback amplifiers

Expanding the usability of current-feedback amplifiers

Low-Noise, High-Voltage, Current-Feedback Op Amplifiers datasheet (Rev. E)

THS3111 Series