MIC5842YWM-TR
Active8-BIT SERIAL-IN LATCHED DRIVER, DIODES 18 SOIC .300IN T/R ROHS COMPLIANT: YES
Deep-Dive with AI
Search across all available documentation for this part.
MIC5842YWM-TR
Active8-BIT SERIAL-IN LATCHED DRIVER, DIODES 18 SOIC .300IN T/R ROHS COMPLIANT: YES
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | MIC5842YWM-TR |
|---|---|
| Current - Output (Max) [Max] | 500 mA |
| Input Type | Non-Inverting |
| Interface | Strobe, Serial |
| Mounting Type | Surface Mount |
| Number of Outputs | 8 |
| Operating Temperature [Max] | 85 C |
| Operating Temperature [Min] | -55 C |
| Output Configuration | Low Side |
| Output Type | Bipolar |
| Package / Case | 18-SOIC |
| Package / Case [y] | 0.295 in |
| Package / Case [y] | 7.5 mm |
| Ratio - Input:Output | 1:8 |
| Supplier Device Package | 18-SOP |
| Switch Type | Latched Driver |
| Voltage - Load [Max] | 15 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 3.97 | |
| 25 | $ 3.31 | |||
| 100 | $ 3.02 | |||
| Digi-Reel® | 1 | $ 3.97 | ||
| 25 | $ 3.31 | |||
| 100 | $ 3.02 | |||
| Tape & Reel (TR) | 1000 | $ 3.02 | ||
| Microchip Direct | T/R | 1 | $ 3.97 | |
| 25 | $ 3.31 | |||
| 100 | $ 3.02 | |||
| 1000 | $ 2.50 | |||
| 5000 | $ 2.33 | |||
| 10000 | $ 2.15 | |||
| Newark | Each (Supplied on Full Reel) | 1000 | $ 3.11 | |
Description
General part information
MIC5842 Series
Using BiCMOS technology, the MIC5841/5842 integrated circuits were fabricated to be used in a wide variety of peripheral power driver applications. The devices each have an eight-bit CMOS shift register, CMOS control circuitry, eight CMOS data latches, and eight bipolar current-sink Darlington output drivers.
These two devices differ only in maximum voltage ratings. The MIC5842 offers premium performance with a minimum output breakdown voltage rating of 80V (50V sustaining). The drivers can be operated with a split supply where the negative supply is down to -20V.
The 500 mA outputs, with integral transient-suppression diodes, are suitable for use with lamps, relays, solenoids and other inductive loads.
Documents
Technical documentation and resources
