
MCP1825-0802E/ET
Active500 MA CMOS LDO, VOUT=0.8V, EXTENDED TEMP RANGE 5 DDPAK TUBE ROHS COMPLIANT: YES
Deep-Dive with AI
Search across all available documentation for this part.

MCP1825-0802E/ET
Active500 MA CMOS LDO, VOUT=0.8V, EXTENDED TEMP RANGE 5 DDPAK TUBE ROHS COMPLIANT: YES
Technical Specifications
Parameters and characteristics for this part
| Specification | MCP1825-0802E/ET |
|---|---|
| Control Features | Enable, Power Good |
| Current - Output | 500 mA |
| Current - Quiescent (Iq) | 220 µA |
| Mounting Type | Surface Mount |
| Number of Regulators | 1 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Positive |
| Output Type | 1.81 mOhm |
| Package / Case | TO-263-6, TO-263BA, D2PAK (5 Leads + Tab) |
| Protection Features | Under Voltage Lockout (UVLO), Short Circuit, Over Temperature |
| PSRR | 60 dB |
| Supplier Device Package | DDPAK-5 |
| Voltage - Input (Max) [Max] | 6 V |
| Voltage - Output (Min/Fixed) | 0.8 V |
| Voltage Dropout (Max) [Max] | 0.35 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tube | 1 | $ 1.51 | |
| 25 | $ 1.26 | |||
| 100 | $ 1.14 | |||
| Microchip Direct | TUBE | 1 | $ 1.51 | |
| 25 | $ 1.26 | |||
| 100 | $ 1.14 | |||
| 1000 | $ 1.11 | |||
| 5000 | $ 1.09 | |||
| Newark | Each | 100 | $ 1.21 | |
Description
General part information
MCP1825S Series
The MCP1825/MCP1825S is a 500 mA Low Dropout (LDO) linear regulator that provides high current and low output voltages. The MCP1825 comes in a fixed or adjustable output voltage version, with an output voltage range of 0.8V to 5.0V. The 500 mA output current capability, combined with the low output voltagecapability, make the MCP1825 a good choice for new sub-1.8V output voltage LDO applications that have high current demands. The MCP1825S is a 3-pin fixed voltage version. The MCP1825/MCP1825S is stable using ceramic output capacitors that inherently provide lower output noise and reduce the size and cost of the entire regulator solution. Only 1 μF of output capacitance is needed to stabilize the LDO.
Documents
Technical documentation and resources