LIS25BATR
ActiveMEMS DIGITAL OUTPUT MOTION SENSOR: LOW NOISE, HIGH BANDWITH, 3-AXIS ACCELEROMETER WITH TDM INTERFACE
LIS25BATR
ActiveMEMS DIGITAL OUTPUT MOTION SENSOR: LOW NOISE, HIGH BANDWITH, 3-AXIS ACCELEROMETER WITH TDM INTERFACE
Technical Specifications
Parameters and characteristics for this part
| Specification | LIS25BATR |
|---|---|
| Acceleration Range | 3.85 g |
| Axis [x] | X |
| Axis [y] | Y |
| Axis [z] | Z |
| Bandwidth | 2.34 kHz |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 C |
| Output Type | I2C |
| Package / Case | 14-VFLGA |
| Sensitivity (LSB/g) | 8196 LSB/g |
| Type | Digital |
| Voltage - Supply [Max] | 1.99 V |
| Voltage - Supply [Min] | 1.71 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 7.33 | |
| 10 | $ 5.50 | |||
| 25 | $ 4.89 | |||
| 50 | $ 4.64 | |||
| 100 | $ 4.52 | |||
| 500 | $ 3.79 | |||
| 1000 | $ 3.54 | |||
| Digi-Reel® | 1 | $ 7.33 | ||
| 10 | $ 5.50 | |||
| 25 | $ 4.89 | |||
| 50 | $ 4.64 | |||
| 100 | $ 4.52 | |||
| 500 | $ 3.79 | |||
| 1000 | $ 3.54 | |||
| N/A | 11793 | $ 6.13 | ||
| Tape & Reel (TR) | 5000 | $ 3.02 | ||
| Newark | Each (Supplied on Cut Tape) | 1 | $ 4.34 | |
| 10 | $ 4.04 | |||
| 25 | $ 3.81 | |||
| 50 | $ 3.58 | |||
| 100 | $ 3.34 | |||
| 250 | $ 3.24 | |||
| 500 | $ 3.23 | |||
| 1000 | $ 3.22 | |||
Description
General part information
LIS25 Series
The STEVAL-MKI211V1K evaluation board has an embedded LIS25BA 3D accelerometer which is connected through flat cable to a simple adapter board (STEVAL-MKIGIBV3) to render it compatible with STEVAL-MKI109V3.
The sensor is soldered precisely in the center of the board and double-sided adhesives are provided to allow users to conveniently mount the board on equipment destined for vibration analysis. Alternatively, you can mount the board using the holes located in each corner of the PCB.
The STEVAL-MKIGIBV3 can be plugged into a standard DIL 24 socket. The kit provides the complete LIS25BA pin-out and comes ready-to-use with the required decoupling capacitors on the VDD power supply line.
Documents
Technical documentation and resources
